AW: AW: [Asterisk-Users] probs with loading tor2 and wcusb

[Thomas Haeger]

Is an owen irq required ?
The card shares one irq with other devices....

-----Ursprüngliche Nachricht-----
Von: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Michael
Bielicki
Gesendet: Mittwoch, 29. Oktober 2003 17:33
An: asterisk-users at lists.digium.com
Betreff: Re: AW: [Asterisk-Users] probs with loading tor2 and wcusb


did you check that there are no irq conflicts ?

On Wednesday 29 October 2003 3:13 pm, Thomas Haeger wrote:
> Hi i'am again,
>
> here my zapata.conf:
>
>
> span=1,0,0,ccs,hdb3,crc4
> span=2,0,0,ccs,hdb3,crc4
> span=3,0,0,ccs,hdb3,crc4
> span=4,0,0,ccs,hdb3,crc4
>
> bchan=1-15,17-31
> dchan=16
>
> bchan=32-46,48-62
> dchan=47
>
> bchan=63-77,79-93
> dchan=78
>
> bchan=94-108,110-124
> dchan=109
>
> loadzone = fr
> defaultzone=fr
>
>
> If i comment out the span,bchan and dchan values and then ztcfg works.
> But this is naturally not wished ;-)
>
> Any ideas (agian...) ?
>
> Regards,
>
> Thomas.
>
> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thomas
> Haeger
> Gesendet: Mittwoch, 29. Oktober 2003 14:05
> An: asterisk-users at lists.digium.com
> Betreff: AW: [Asterisk-Users] probs with loading tor2 and wcusb
>
>
> Ok,
>
> meanwhile i loaded the tor2 driver with insmod (previous loaded slhc,
> ppp_generic,zaptel)
> this works, but when i execute ztcfg the machine is freezed!
>
> Now any ideas ?
>
> Thanks,
>
> Thomas.
>
> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thomas
> Haeger
> Gesendet: Mittwoch, 29. Oktober 2003 12:32
> An: Asterisk User
> Betreff: [Asterisk-Users] probs with loading tor2 and wcusb
>
>
> Hi all,
>
> i tried to load the tor2 driver for the E400P with
>
> 	modprobe tor2
>
> on a P4 2,7Ghz machine.
>
> and everything seems to be ok. but after load (after the kernel messages)
> the machine is freezed.
> And then i have to reset the whole machine.
>
> The same is happend when i try to load the wcusb driver on a VIA EPIA 5000
> machine.
>
> Any ideas ?
>
>
> Thanks,
>
> Thomas.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

--
Michael Bielicki
Managing Director
TAAN Consultants Ltd
http://www.global-gateway.net/

--------------------------------------------------------------------------

This correspondence is for the named person's use only. It may contain
confidential or legally privileged information or both. No confidentiality
or privilege is waived or lost by any mistransmission. If you receive this
correspondence in error, please immediately delete it from your system and
notify the sender. You must not disclose, copy or rely on any part of this
correspondence if you are not the intended recipient.

Any opinions expressed in this message are those of the individual sender.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users