[Asterisk-Users] FW: Voice/Data mixed routing over Digium E1/T1 Card

[DUSTIN WILDES]

I'm currently using this setup for a channelized T1 for voice and data.
First 9 channels of the T1 are voice - the rest are data for internet.
 
Works extremely well!
This is being used for a production server that receives/places around 500 calls per day.

-----Original Message-----
From: Ray Burkholder [mailto:ray at oneunified.net]
Sent: Wednesday, October 29, 2003 9:01 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] FW: Voice/Data mixed routing over Digium E1/T1 Card





The documentation mentions that the Digium channels can be split into some voice channels and the remainder of the channels used for routing IP traffic.

Does any one have this in use in conjunction with Asterisk?  Does it work well?  Would you recommend it for a production server?

Obviously, if this works, this makes for a cost effective platform where you obtain one E1/T1 to a provider, and they can provide TDM and data over the one circuit.  No separate router required.

Ray Burkholder 
ray at oneunified.net 
 <http://www.oneunified.net> http://www.oneunified.net 
704 576 5101 


-- 
Scanned for viruses & dangerous content at One Unified <http://www.oneunified.net>  and is believed to be clean. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/4970bc47/attachment.htm