AW: [Asterisk-Users] probs with loading tor2 and wcusb

[Thomas Haeger]

Hi i'am again,

here my zapata.conf:


span=1,0,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4
span=3,0,0,ccs,hdb3,crc4
span=4,0,0,ccs,hdb3,crc4

bchan=1-15,17-31
dchan=16

bchan=32-46,48-62
dchan=47

bchan=63-77,79-93
dchan=78

bchan=94-108,110-124
dchan=109

loadzone = fr
defaultzone=fr


If i comment out the span,bchan and dchan values and then ztcfg works.
But this is naturally not wished ;-)

Any ideas (agian...) ?

Regards,

Thomas.

-----Ursprüngliche Nachricht-----
Von: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thomas
Haeger
Gesendet: Mittwoch, 29. Oktober 2003 14:05
An: asterisk-users at lists.digium.com
Betreff: AW: [Asterisk-Users] probs with loading tor2 and wcusb


Ok,

meanwhile i loaded the tor2 driver with insmod (previous loaded slhc,
ppp_generic,zaptel)
this works, but when i execute ztcfg the machine is freezed!

Now any ideas ?

Thanks,

Thomas.

-----Ursprüngliche Nachricht-----
Von: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thomas
Haeger
Gesendet: Mittwoch, 29. Oktober 2003 12:32
An: Asterisk User
Betreff: [Asterisk-Users] probs with loading tor2 and wcusb


Hi all,

i tried to load the tor2 driver for the E400P with

	modprobe tor2

on a P4 2,7Ghz machine.

and everything seems to be ok. but after load (after the kernel messages)
the machine is freezed.
And then i have to reset the whole machine.

The same is happend when i try to load the wcusb driver on a VIA EPIA 5000
machine.

Any ideas ?


Thanks,

Thomas.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users