[Asterisk-Users] SS7 signaling/Softswitch

[Steve Underwood]

OK. If are talking about masses of messy details, then I agree with you.

Regards,
Steve

CW_ASN wrote:

>Steve:
>
>Ok, if you like to hear about Cisco BTS10200 and Cisco ITP configurations,
>good... I have no problems with that...
>We will discuss HERE all the configurations needed to bring up a CCS7 links
>in ITP, how load a SPC formats, and how can I add an TGCP route in BTS...
>Sure! Why not?
>
>
>Regards,
>
>Gus
>
>----- Original Message -----
>From: "Steve Underwood" <steveu at coppice.org>
>To: <asterisk-users at lists.digium.com>
>Sent: Sunday, October 26, 2003 2:14 AM
>Subject: Re: [Asterisk-Users] SS7 signaling/Softswitch
>
>
>  
>
>>Interesting. Someone thinks that a strategic use for * should be off
>>this list. Someone thought my FAX modem for * should be off this list.
>>However, nobody seems to think a 1000 messages about Grandstream phones
>>should be off this list.
>>
>>Personally I would welcome seeing more of what people are doing in the
>>softswitch area.
>>
>>Regards,
>>Steve
>>
>>CW_ASN wrote:
>>
>>    
>>
>>>Juan:
>>>
>>>I think that we must continue with the discussion out of this list.
>>>
>>>"Te contacto por fuera de la lista."
>>>
>>>Regards,
>>>
>>>Gus
>>>
>>>----- Original Message -----
>>>From: "Juan J. Sierralta P." <juanjo at atmlab.utfsm.cl>
>>>To: "Asterisk Users" <asterisk-users at lists.digium.com>
>>>Sent: Friday, October 24, 2003 7:50 PM
>>>Subject: Re: [Asterisk-Users] SS7 signaling/Softswitch
>>>
>>>
>>>
>>>
>>>      
>>>
>>>>On Fri, 2003-10-24 at 16:29, CW_ASN - Gus wrote:
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>>>No, its not 100% accured. * can be used as Softswitch in MGCP... all
>>>>>
>>>>>
>>>>>          
>>>>>
>>>"good"
>>>
>>>
>>>      
>>>
>>>>>softswitchs uses MGCP/TGCP/NCS to manage each endpoint. I have 1 * box
>>>>>
>>>>>
>>>>>          
>>>>>
>>>under
>>>
>>>
>>>      
>>>
>>>>>test with Cisco BTS10200, and * works very fine with this softswitch.
>>>>>
>>>>>
>>>>>          
>>>>>
>>>You
>>>
>>>
>>>      
>>>
>>>>>could use SIP too...
>>>>>
>>>>>
>>>>>          
>>>>>
>>>>Can you explain that setup a bit more ?
>>>>You mean that BTS is controling the * box using MGCP or the inverse ?
>>>>Cause a I have an * box using a BTS+AS5300 as its PTSN gateway using
>>>>SIP. But the BTS receives the SS7 signaling(via an ITS i think) and
>>>>controls the AS5300 via MGCP. Then the * box it is another SIP route
>>>>inside the BTS.
>>>>
>>>>
>>>>--
>>>>Juanjo sin .sig
>>>>
>>>>
>>>>        
>>>>