[Asterisk-Users] Help with Dev Kit Lite

[costas]

How did you determine that they are faulty? Did Digium replace them? 

Thanks

---------- Original Message ----------------------------------
From: WipeOut <wipe_out at onetel.com>
Reply-To: asterisk-users at lists.digium.com
Date:  Sat, 25 Oct 2003 08:39:31 +0100

>costas wrote:
>
>>I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it.  I also think they have a bug in the zapata.conf where the context should be incoming and not internal.
>>
>>1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event. 
>>I did set the phone.conf mode to be dialtone but nothing works.
>>
>>2) I can dial from the outside and the phone on the S100U rings. Asterisk shows Ringing. However when I pick it up it says "Attempting to Bridge". I wait a while but doesnt work. There is no communication between the outside phone and the one on the S100U.
>>
>>There is no sound card in the machine. I assume its not the problem.
>>
>>The machine is an RH9 with 2.2Ghz and 256RAM.
>>
>>Any ideas or help would be appreciated.
>>
>>  
>>
> I had similar problems with my S100U.. In fact I went through three of 
>them in 6 months... The just kept breaking..
>
>So I would be inclined to suspect a faulty S100U over an incorrect 
>configuration..
>
>Later..
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>

--
Costas Menico
Meezon Software Corp
201-224-8111
costas at meezon.com

--