[Asterisk-Users] Help with Dev Kit Lite

[WipeOut]

costas wrote:

>I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it.  I also think they have a bug in the zapata.conf where the context should be incoming and not internal.
>
>1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event. 
>I did set the phone.conf mode to be dialtone but nothing works.
>
>2) I can dial from the outside and the phone on the S100U rings. Asterisk shows Ringing. However when I pick it up it says "Attempting to Bridge". I wait a while but doesnt work. There is no communication between the outside phone and the one on the S100U.
>
>There is no sound card in the machine. I assume its not the problem.
>
>The machine is an RH9 with 2.2Ghz and 256RAM.
>
>Any ideas or help would be appreciated.
>
>  
>
 I had similar problems with my S100U.. In fact I went through three of 
them in 6 months... The just kept breaking..

So I would be inclined to suspect a faulty S100U over an incorrect 
configuration..

Later..