[Asterisk-Users] asterisk and zplex10b

[austino at skannet.com]

 Thanks Don Pobanz,
the situation still persists...this is what i have in the zapata.conf

[channels]
context=internal
context=incoming
context=default
usecallerid=no
usecallwaiting=no
signalling=fxs_ks
channel=1-8
signalling=fxo_ks
channel=16-24

but i still have the the warning
"file chan_zap.c line 4155(ss_thread):callerID returned with error on
channel'Zap/6-1'

advice and suggestions will be appreciated........


On Thu, 23 Oct 2003, Don Pobanz wrote:

> On Thursday, October 23, 2003 8:52 AM, austino at skannet.com
> [SMTP:austino at skannet.com] wrote:
> >
> >
> > hello * users,
> > i am using a zplex 10b(8fxosand 16fxs) connected to a T100 digium
> > card,
> > RH8.0.
> >
> > soon after running * i get this warning
> >
> > "file chan_zap.c,line 4155 (ss_thread):CallewrID returned with error
> > on
> > channel 'zap/7-1'
> >
>
> The zhone does not support inbound callerID. Try turning off Caller ID
> on your inbound channels(1-8) in zapata.conf.
>
> I am using a zhone in this manner and it works fine for me.
>
> Don Pobanz
>
> > then executes the other applications itself.
> >
> > --executing Wait("Zap/7-1","1") in new stack.
> > -- executing.....
> >
> >
> > it gives the same warning message even when the amphaenol calbe is
> > not
> > attached to the zhone.
> >
> >
> > This makes it quite impossible to recieve call from outside or dial
> > out
> > form the asterisk.
> >
> > suggestions will be appreciated.
> >
> >
> >
> > regards
> > --
> > Olaifa Augustine
> > tel:- 234-2-8105156
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

-- 
Olaifa Augustine
General Data Engineering Services Ltd
18b oshin road,kongi bodija
p.o.box 29460, secretariate,
ibadan.
tel:- 234-2-8105156