[Asterisk-Users] agi script forcing asterisk reload

[Muhammad Nasim]

Thanks Steve I'll try it with the global variable first and then later have
a go at the DBput etc.
----- Original Message -----
From: "Steven Critchfield" <critch at basesys.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, October 23, 2003 5:00 PM
Subject: Re: [Asterisk-Users] agi script forcing asterisk reload


> On Thu, 2003-10-23 at 10:51, Muhammad Nasim wrote:
> > Thanks for your reply.  It seems I may be proceeding in the wrong
direction.
> > I  have a context with time arguments e.g. include
> > somecontext|18:00-9-00|mon-fri So the system behaves according to
standard
> > office hours.
> > I want to be able to leave the office in office hours e.g at 13:00, dial
a
> > number and move straight to an office closed behaviour. I want to come
back
> > to the office at 16:00 and dial another number and move back to my
original
> > scenario.
> >
> > What you say makes sense to me now. However I am new to this so a bit
dense
> > :).
> >
> > I suppose I could have an agi script that did a DBput and stored a
different
> > value for a 'switch' variable based on the number dialled. The gotoif
would
> > then work based on the value obtained by DBget which would be different
> > based on what the 'switch' variable value was set to.
> >
> > Have I understood what you are saying correctly and am I making sense?
>
> You have understood it. I would probably use a global variable and leave
> it at that, but dbput/dbget will make sure if your machine unexpectedly
> reboots while in a specified state that it will remain in that state.
>
> > ----- Original Message -----
> > From: "Steven Critchfield" <critch at basesys.com>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Thursday, October 23, 2003 3:31 PM
> > Subject: Re: [Asterisk-Users] agi script forcing asterisk reload
> >
> >
> > > On Thu, 2003-10-23 at 08:44, Muhammad Nasim wrote:
> > > > Hi. I am using #include to include a file in extensions.conf. I have
> > > > an agi perl script which modifies the #included file and then forces
> > > > an asterisk reload with 'system("asterisk -rx reload")';
> > > >
> > > > After the reload I use set_context, set_extension and set_priority
to
> > > > tell asterisk where I want it to carry on from which is line 2 of
the
> > > > following.
> > > >
> > > > exten => *80,1,AGI(bla.pl, ${EXTEN})
> > > > exten => *80,2,Background(please_wait_while)
> > > > exten => *80,3,Hangup
> > > >
> > > > This works some of the time. However at other times the sip channel
> > > > remains active and somehow asterisk doesn't find its way to line 2
> > > > after the reload (although the reload still happens). So I don't get
> > > > by Background or Hangup being executed some of the time.
> > > >
> > > > Can anyone point me in some direction with how to debug this
> > > > intermittent behaviour further?
> > > > Does anyone know of any issues with an agi script forcing a reload
in
> > > > this way?
> > >
> > > Well, I wonder why you are doing the above actions. IF it is for a
user
> > > selectable dialplan like a day/night operation, maybe you should look
> > > into setting those dialplans up in their own context and doing gotoif
> > > based switching on a known variable. This is a lot better than
changing
> > > the in memory dialplan for this.
> > >
> > > --
> > > Steven Critchfield  <critch at basesys.com>
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> Steven Critchfield  <critch at basesys.com>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>