[Asterisk-Users] Australian Options

[Matthew Enger]

Hello,

Is A-tick just a certification or is something done to each card? I contacted
the Australian distributor and their wholesale prices are twice the price of
that of a UK supplier who frequents this list! So I am wondering what does
A-tick mean?

Thanks,

Matthew Enger
menger at xi.com.au

Quoting Anthony Wood <woody+asterisk at switchonline.com.au>:

> On Tue, Jul 29, 2003 at 12:28:48AM +1000, Adam Goryachev wrote:
> > > Adam why would you need a channel Bank for the E100P?
> > >
> > > Regards
> > >
> > > Mark McKibbin
> > 
> > As I specified below:
> > 
> > > Again, with smaller offices (say 15 or less extensions) the price of a
> > > TE400P card is too expensive, will there be a TE100P card produced and
> > > approved for use in Australia?
> > > Even if it is, will this solve the problem? I'm thinking not, because
> > > the single port would need to connect to a channel bank which in turn
> > > would connect to the telco plus extensions, therefore we are back to
> > > the same situation as with analog lines above.
> > [ie, requiring an E1 channel bank with approval for use in Australia]
> > 
> > So, I still haven't received a single suggestion to this question:
> > 
> > > So, really, are there any decent solutions for asterisk use in
> > > Australia?
> > >
> > > PS, currently I am using the TDM400B plus Traverse Netjet ISDN with I4L,
> > > but this doesn't seem suitable quality for re-sale.
> > 
> > Add-on, I know this isn't suitable quality for re-sale because it uses I4L
> > and not chan_capi, but I don't know of any chan_capi ISDN hardware which
> is
> > approved for use in Australia either.
> 
> (yes this thread is 3 months old)
> 
> The Australian distributor for AVM has AVM Fritz PCI cards for sale which are
> A-ticked.
> 
> The price is steeper due to the cost of the A-tick.
> 
> cheers,
> Woody
> 
> > If there was such a thing, this would at least easily enough provide 4
> > channels + 8 extensions with 2 x ISDN + 2 x TDM400B cards.... Then of
> > course, for 10 channels in with 14 extensions ?? Still need a channel bank
> > solution, or force the use of an OnRamp 10 with the TE400P which doesn't
> > have approval yet.
> > 
> > Regards,
> > Adam
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> -- 
> Woody
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 




----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.