[Asterisk-Users] Call forwarding

[JanM]

I have talked to my Telco and they allow me to send the whole range of numbers that we are using. This is what * says (where 018539226 is the number I´m calling from to test the redirection):

Asterisk Ready.
    -- Remote UNIX connection
    -- Executing Dial("CAPI[contr2/910]", "SIP/BYEXTENSION at 226|5") in new stack
    -- Called 910 at 226
    -- SIP/226-26c8 is ringing
    -- SIP/226-26c8 is ringing
    -- Nobody picked up in 5000 ms
    -- Executing Dial("CAPI[contr2/910]", "CAPI/526018539226:BBYEXTENSION") in new stack
    -- Called 526018539226:B910
    -- CAPI[contr2/526018539226]/1 is making progress passing it to CAPI[contr2/910]
  == Spawn extension (default, 910, 2) exited non-zero on 'CAPI[contr2/910]'
asterisk*CLI>

I think this is an easy thing to do but I don´t seem to get it right..., any more idea´s anyone?

---JanM---

> -----Ursprungligt meddelande-----
> Från: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]För Jean-Christophe Heger
> Skickat: den 21 oktober 2003 13:42
> Till: asterisk-users at lists.digium.com
> Ämne: Re: [Asterisk-Users] Call forwarding
> 
> 
> Wipeout is right on the fact you cannot announce yourself with a phone
> number which is not allowed by your operator, else anybody could announce
> itself with any number. But it could be authorized for special cases.
> 
> Regarding your example, if you belong som MSNs 526xxx, and 226 matches the
> MSN 526266 you could say:
> 
> exten => 910,2,Dial,CAPI/526${CALLERIDNUM}:bmymobilenr|20
> or even
> exten => 910,2,Dial,CAPI/${CALLERIDNUM}:bmymobilenr|20
> 
> The right syntax is ${...}, and not $(...).
> 
> Most of the time, you can use the revelant numbers where the 
> point-to-point
> switching is made. The rest of the MSN is automatically completed by the
> operator.
> 
> Of course, the outgoing MSN must match the ones you've defined in 
> capi.conf.
> Try to announce the incoming MSN with the 3 last digits and see how it
> works.
> 
> Jean-Christophe
> 
> ----- Original Message ----- 
> From: "JanM" <asterisk-pbx at kraftnat.aland.fi>
> To: <asterisk-users at lists.digium.com>
> Sent: Tuesday, October 21, 2003 12:05 PM
> Subject: [Asterisk-Users] Call forwarding
> 
> 
> Hi all,
> 
> I would like to forward an incoming call to my mobile with the incoming
> callerID after ten seconds, I have tried with this:
> 
> exten => 910,1,Dial,SIP/BYEXTENSION at 226|10
> exten => 910,2,Dial,CAPI/526$(CALLERIDNUM):bmymobilenr|20
> exten => 910,3,Voicemail,u226
> exten => 910,102,Voicemail,b226
> 
> The second row is not right and I can´t get it to work, any idea´s?
> 
> ---JanM---
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users