[Asterisk-Users] Paging/Intercom (was: OT - SIP Auto-Answer for Cisco 7940/7960!!)

[Andy Hester]

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Andrew
> Joakimsen
> Sent: Friday, October 17, 2003 4:12 PM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] Paging/Intercom (was: OT - SIP Auto-Answer
> for Cisco 7940/7960!!)
>
>
> Which model? Are you using them directly with Asterisk? Analog phones
> should only be 1 line, IMO all the call processing should be handled by
> Asterisk.
>

I am using the ST310 and the SE310(console).  The ST110,210,&310 are
basically the same phone, its just a matter of how many lines the phone is
programmed to take AFAIK. ie you could get an ST110 and later set up 2 more
lines on it.  As far as analog phones needing to be 1 line only, I have not
seen a problem.  It seems to complement * quite well. Because of the
flexibility of * and these phones, the possibilies are interesting.  Please
correct me if I've missed something as to why analog phones should be single
line.

Andy


>
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> > admin at lists.digium.com] On Behalf Of Andy Hester
> > Sent: Friday, October 17, 2003 10:11 AM
> > To: asterisk-users at lists.digium.com
> > Subject: RE: [Asterisk-Users] Paging/Intercom (was: OT - SIP
> Auto-Answer
> > for Cisco 7940/7960!!)
> >
> >
> > > On the analog front, since we're talking about paging or intercom:
> it
> > > has been mentioned that the Sayson ADSI phones (Aastra?) are
> > > integrated with an Altigen PBX system, that the phones can support
> > > paging.  See the link below.
> > >
> > > http://www.sayson.com/product/Altigen.htm
> > >
> > > If this could be combined with a Cisco ATA-186 or similar product,
> > > would it not be possible to have paging via SIP delivery?  I have
> not
> > > put anything other than the most basic thought into this, and I
> don't
> > > know exactly how they support ADSI-based paging, but has anyone
> > > worked on this?  I mentioned it via IRC and someone said they took a
> > > half-hearted stab at it, but it didn't sound like it had been
> > > explored in depth.  That is a major feature issue that most business
> > > customers are looking for, and it would be great to have some
> > > combination of devices that offered paging or intercom.
> > >
> > > JT
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > I have just put in some analog phones that offer intercom/paging and
> work
> > rather well so far.
> >
> > They are Smartalk phones. (NOT ADSI)  The guys there have been real
> good
> > about helping me get buttons programmed exactly the way I want them
> etc.
> > These phones also allow for staion monitoring and have an attendant
> > console.
> > These phones use 4-pair wiring so 3 lines + power pair.  The power
> pair is
> > also responsible for the intercom/paging/station monitoring.  With the
> > right
> > wiring it might work with an ata device.  Just a thought.
> >
> > http://smartalk.ca/nrgover.htm
> >
> > Andy
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users