[Asterisk-Users] CallerID not passed to Sprint & Verizon Cellphones via XO PRI

justin at vergeworks.com justin at vergeworks.com
Thu Oct 16 16:15:02 MST 2003


Here is a call to my cell phone (last 4 digits X'd out):

----------------------START PRI DEBUG----------------------------
ast01-fmt*CLI>
    -- Executing SetCallerID("SIP/5250-5c7f", ""Justin 
Eckhouse"<510743XXXX>") in new stack
    -- Executing Dial("SIP/5250-5c7f", "Zap/g1/301XXXX") in new stack
-- Making new call for cr 32956
> Protocol Discriminator: Q.931 (8)  len=61
> Call Ref: len= 2 (reference 188/0xBC) (Originator)
> Message type: SETUP (5)
> Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer 
capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, 
circuit-mode (16)
>                              Ext: 1  User information layer 1: u-Law 
(34)
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive 
Dchan: 0
>                        ChanSel: Reserved
>                       Ext: 1  Coding: 0   Number Specified   Channel 
Type: 3
>                       Ext: 1  Channel: 1 ]
> Display (len=16) [ > Display (len=16) [ 1> Display (len=16) [ 1J> 
Display (len=16) [ 1Ju> Display (len=16) [ 1Jus> Display (len=16) [ 1Just> 
Display (len=16) [ 1Justi> Display (len=16) [ 1Justin> Display (len=16) [ 
1Justin > Display (len=16) [ 1Justin E> Display (len=16) [ 1Justin Ec> 
Display (len=16) [ 1Justin Eck> Display (len=16) [ 1Justin Eckh> Display 
(len=16) [ 1Justin Eckho> Display (len=16) [ 1Justin Eckhou> Display 
(len=16) [ 1Justin Eckhous> Display (len=16) [ 1Justin Eckhouse> Display 
(len=16) [ 1Justin Eckhouse ]
> Progress Indicator (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 
0: 0   Location: User (0)
>                               Ext: 1  Progress Description: Calling 
equipment is non-ISDN. (3) ]
> Calling Number (len=14) [ Ext: 0  TON: Unknown Number Type (0)  NPI: 
Unknown Number Plan (0)
>                           Presentation: Presentation permitted, user 
number passed network screening (1) '510743XXXX' ]
> Called Number (len=10) [ Ext: 1  TON: Unknown Number Type (0)  NPI: 
Unknown Number Plan (0) '301XXXX' ]
    -- Called g1/301XXXX
< Protocol Discriminator: Q.931 (8)  len=13
< Call Ref: len= 2 (reference 32956/0x80BC) (Terminator)
< Message type: STATUS (125)
< Cause (len= 3) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   
Location: User (0)
<                  Ext: 1  Cause: Access information discarded (43), class 
= Network Congestion (2) ]
<              Cause data 0: 01 (1)
< Call State (len= 1) [ Ext: 0  Coding: CCITT (ITU) standard (0) Call 
state: Call Initiated (1)
-- Processing IE 8 (Cause)
-- Processing IE 20 (Call State)
< Protocol Discriminator: Q.931 (8)  len=10
< Call Ref: len= 2 (reference 32956/0x80BC) (Terminator)
< Message type: CALL PROCEEDING (2)
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive 
Dchan: 0
<                        ChanSel: Reserved
<                       Ext: 1  Coding: 0   Number Specified   Channel 
Type: 3
<                       Ext: 1  Channel: 1 ]
-- Processing IE 24 (Channel Identification)
< Protocol Discriminator: Q.931 (8)  len=9
< Call Ref: len= 2 (reference 32956/0x80BC) (Terminator)
< Message type: PROGRESS (3)
< Progress Indicator (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 
0: 0   Location: Public network serving the local user (2)
<                               Ext: 1  Progress Description: Inband 
information or appropriate pattern now available. (8) ]
-- Processing IE 30 (Progress Indicator)
> Protocol Discriminator: Q.931 (8)  len=12
> Call Ref: len= 2 (reference 188/0xBC) (Originator)
> Message type: STATUS (125)
> Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   
Location: User (0)
>                  Ext: 1  Cause: Wrong message (98), class = Protocol 
Error (6) ]
> Call State (len= 1) [ Ext: 0  Coding: CCITT (ITU) standard (0) Call 
state: Outgoing call  Proceeding (3)
< Protocol Discriminator: Q.931 (8)  len=13
< Call Ref: len= 2 (reference 32956/0x80BC) (Terminator)
< Message type: STATUS (125)
< Cause (len= 3) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   
Location: User (0)
<                  Ext: 1  Cause: Invalid information element contents 
(100), class = Protocol Error (6) ]
<              Cause data 0: 01 (1)
< Call State (len= 1) [ Ext: 0  Coding: CCITT (ITU) standard (0) Call 
state: Outgoing call  Proceeding (3)
-- Processing IE 8 (Cause)
-- Processing IE 20 (Call State)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Outgoing call  Proceeding, 
peerstate Incoming Call Proceeding
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 188/0xBC) (Originator)
> Message type: DISCONNECT (69)
> Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   
Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal 
Event (1) ]
    -- Hungup 'Zap/1-1'
  == Spawn extension (TeraSource-intern-ext, 9301XXXX, 2) exited non-zero 
on 'SIP/5250-5c7f'
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 32956/0x80BC) (Terminator)
< Message type: RELEASE (77)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release 
Request
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 188/0xBC) (Originator)
> Message type: RELEASE COMPLETE (90)
> Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   
Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal 
Event (1) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
----------------------------STOP PRI DEBUG-------------------------


On Thu, 16 Oct 2003, CW_ASN - Gus wrote:

> I don't know how US works in matter of PRI and his standards, nor C7 ANSI
> level, but I think that don't have a lot of differences with european
> standard.
> Make sure that you are sending ANI in setup message, and presentation byte
> is set to "Allow". If you don't know, please send a 'pri debug'.
> 
> Regards,
> 
> Gus
> 
> ----- Original Message -----
> From: <justin at vergeworks.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Thursday, October 16, 2003 7:02 PM
> Subject: [Asterisk-Users] CallerID not passed to Sprint & Verizon Cellphones
> via XO PRI
> 
> 
> > Hi,
> >
> > I have an odd problem where when a call is made to any landline phone the
> > callerid number shows up on the caller id device with no problems. However
> > when I call a cell phone from Sprint or Verizon it always shows up as
> > unavaliable. I've tried multiple cell phones from each carrier. Though
> > today I called a t-mobile phone and the callerid came through fine.
> >
> > Is this an * level problem or is it an XO problem? Or somewhere higher up
> > on the chain?
> >
> > XO is the PRI provider. I have a T100P card, and I'm running Asterisk
> > CVS-10/08/03-21:01:29.
> >
> > Ideas?
> >
> > Thanks,
> > Justin
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 




More information about the asterisk-users mailing list