[Asterisk-Users] Outgoing CallerID

[Mickey Binder]

> JanM wrote:
> 
> > Hello,
> > 
> > Does anyone know how to set the outgoing CallerID properly 
> when using Snom200/SIP/CAPI/BRI?
> > 
--SNIP--
> > My mobile is only showing some other number that my isdn 
> line is having.
> > 
> > ---JanM---
> Telecom restrictions?
> I can set only caller IDs within the set of numbers provided 
> me from telecom.
> Check with your telecom if you're allowed to set any caller ID.

I'm experiencing the exact same behavior. 

I have an E1 line (using TE410P) with 30 numbers associated to it, and I know that I'm allowed to change the outgoing CallerID, because our production PBX is a Lucent ArgentBranch, and when dialing out from this the CallerId displays correct. I've tried some different configurations in order to get it to work but without luck.

This is a snip of my extensions.conf

[Outgoing]
;
;Outside access via Zaptel interface (PRI)
exten => _XX.,1,SetCallerId(4330xxxx)
exten => _XX.,2,Dial,Zap/g1/BYEXTENSION

The main isdn number is 4399xxxx and is the only number I can get displayed when calling.
 
regards
Mickey Binder