[Asterisk-Users] T100P to Adtran TA750 - No dialtone or ring

Tue Oct 14 14:12:51 MST 2003

Hello all,

  I've got a T100P connected to an Adtran TA750 with a T1 crossover...
This connects to a patch panel with phone ports. The Adtran is fully
populated with FXS cards.
  All I get on any phone port is a fast clicking noise... No dialtone. 
  Asterisk 'sees' the card, (the channels show up in /proc/zaptel).
Incoming calls are routed to the zap/x channel, but no ring.

I'm hoping I'm overlooking something stupid.

Thanks ahead of time...

--Jason

  Here are some (possibly) relevant snippits from various places:

o T100 LED shows green...
o Not showing any errors in /var/log/asterisk/messages (debug logging enabled)
o Adtran config is set to:
  --> 2. Provisioning Templates
  --> 1. Factory Default (ESF,B8ZS,Loopstart)'

o OS/hardware:
  System OS:
   debian testing/unstable
   kernel: Custom 2.4.22-ck
    (Con Kolivas patch set:
      o Preempt
      o Low-latency
      o AA vm hacks
      o RL2 Desktop Tuning
      o Debian logo in FB)

  Digium Cards:
    T100P -->FXS
    X100P -->FXO

o Asterisk version:
  Asterisk CVS-10/02/03-17:52:20

------------------
asterisk:~# cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard T100P T1/PRI Card 0" B8ZS/ESF
        IRQ misses: 21904

 1 WCT1/0/1 FXOKS (In use)
 2 WCT1/0/2 FXOKS (In use)
 3 WCT1/0/3 FXOKS (In use)
 4 WCT1/0/4 FXOKS (In use)
 5 WCT1/0/5 FXOKS (In use)
 6 WCT1/0/6 FXOKS (In use)
 7 WCT1/0/7 FXOKS (In use)
 8 WCT1/0/8 FXOKS (In use)
 9 WCT1/0/9 FXOKS (In use)
10 WCT1/0/10 FXOKS (In use)
11 WCT1/0/11 FXOKS (In use)
12 WCT1/0/12 FXOKS (In use)
13 WCT1/0/13 FXOKS (In use)
14 WCT1/0/14 FXOKS (In use)
15 WCT1/0/15 FXOKS (In use)
16 WCT1/0/16 FXOKS (In use)
17 WCT1/0/17 FXOKS (In use)
18 WCT1/0/18 FXOKS (In use)
19 WCT1/0/19 FXOKS (In use)
20 WCT1/0/20 FXOKS (In use)
21 WCT1/0/21 FXOKS (In use)
22 WCT1/0/22 FXOKS (In use)
23 WCT1/0/23 FXOKS (In use)
24 WCT1/0/24 FXOKS (In use)

------------
asterisk:~# cat /proc/zaptel/2
Span 2: WCFXO/0 "Wildcard X101P Board 1"
 25 WCFXO/0/0 FXSKS (In use)

-----------

asterisk:/etc/asterisk# cat /etc/zaptel.conf
#T1:
span=1,0,0,esf,b8zs
fxoks=1-24
loadzone = us
defaultzone=us

#X100P - Single-line FXO card
fxsks=25

---------

asterisk:/etc/asterisk# cat zapata.conf
...
[channels]
;T1-fxo (incomming channels) on the channel bank
;-----------------
; <Section commented out until we have an fxo card in the CB>
;context = bell
;language = en
;signalling = fxs_ks
;usecallerid = yes
;hidecallerid = no
;echocancel = yes
;echocancelwhenbridged = no
;;if immediate is set to yes, asterisk will automatically answer the line
;;and jump to the 's' extension for the context.
;;immediate = yes
;group = 1
;channel => 1

;T1-fxs (inside handsets) on the channel bank
context = local
language = en
signalling = fxo_ks
rxwink = 300
usecallerid = yes
hidecallerid = no
callwaiting = no
;callwaitingcallerid=yes <--Change if Callwaiting is yes
threewaycalling = yes
transfer = yes
cancelforward = yes
callreturn = no
echocancel = yes
echocanelwhenbridged = no
immediate = no
rxgain=0.0
txgain=0.0
channel => 1-24
...

;SinglePort-fxo (incomming channels)
context = bell
language = en
signalling = fxs_ks
usecallerid = yes
hidecallerid = no
echocancel = yes
echocancelwhenbridged = no
;if immediate is set to yes, asterisk will automatically answer the line
;and jump to the 's' extension for the context.
immediate = yes
group = 1
channel => 25

-------------

Console during a call being routed to zap/1:
    -- Starting simple switch on 'Zap/25-1'
    -- Executing BackGround("Zap/25-1", "thankyou") in new stack
    -- Playing 'thankyou'
  == CDR updated on Zap/25-1
    -- Executing Goto("Zap/25-1", "mainmenu|s|2") in new stack
    -- Goto (mainmenu,s,2)
    -- Executing BackGround("Zap/25-1", "greeting-announcements") in new stack
    -- Playing 'greeting-announcements'
  == CDR updated on Zap/25-1
    -- Executing Goto("Zap/25-1", "routing|300|1") in new stack
    -- Goto (routing,300,1)
    -- Executing Macro("Zap/25-1", "oneline|300|Zap/1") in new stack
    -- Executing DBget("Zap/25-1", "fwdexten=CFU/300") in new stack
    -- DBget: varname=fwdexten, family=CFU, key=300
    -- DBget: Value not found in database.
    -- Executing Goto("Zap/25-1", "s|4") in new stack
    -- Goto (macro-oneline,s,4)
    -- Executing Dial("Zap/25-1", "Zap/1||") in new stack
    -- Called 1
    -- Zap/1-1 is ringing
    -- Zap/1-1 is ringing
    -- Zap/1-1 is ringing
    -- Zap/1-1 is ringing
    -- Zap/1-1 is ringing
    -- Hungup 'Zap/1-1'
  == Spawn extension (macro-oneline, s, 4) exited non-zero on 'Zap/25-1' in macro 'oneline'
  == Spawn extension (routing, s, 1) exited non-zero on 'Zap/25-1'

----------------
asterisk:~# lsmod
Module                  Size  Used by    Not tainted
soundcore               3876   0  (autoclean)
wcusb                  21888   0  (unused)
wcfxo                   8352   1
wct1xxp                12704  24
zaptel                180064  54  [wcusb wcfxo wct1xxp]
ppp_generic            17668   0  [zaptel]
slhc                    5216   0  [ppp_generic]
serial                 48228   1  (autoclean)
sis900                 14476   1
crc32                   2896   0  [sis900]

-- 
---------------------------------------------
Jason Piterak
CIS Technical Services

Public Key available at: 
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4966BB8C