[Asterisk-Users] "New" TDM cards--driver won't load

[Stuart Mackintosh]

Hi all, FYI,

I had a similar problem where the new TDM card would show up in
/proc/pci but would not load the module.

Checked out the latest CVS zaptel, made / installed and loaded straight
away. Used Gigabyte GA-8S648 board.

Stuart.


On Fri, 2003-10-03 at 19:49, Mark Spencer wrote:
> > > Is it showing up on /proc/pci?  It should be a tigerjet.
> >
> > Yes.  I put the other card back in (production machine) but over the
> > weekend I'll get the card in there and capture the output of lspci.
> 
> If the card shows up in /proc/pci then your motherboard *must* be
> supplying 3.3V somehow (unless it's just leaking back somehow, but that
> doesn't seem very likely).
> 
> > Nope.  Doesn't show any sign of seeing the card at all.  It does see the
> > FXO card that's in the same machine.
> 
> We should check the PCI ID's.  There may be a difference in what we're
> looking for and what is there.
> 
> Mark
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 

 | http://www.opusvl.com 
 | T: 08717 50 40 02
 | F: 08717 50 40 03
 | E: sm at opusvl.com