[Asterisk-Users] voicetronix

[mick at netexpress.com.au]

Andrew

I am having trouble with

Sound ( only if you dialling from outside )

Cisco phone can not dial out

If I phone in and select extension number of Cisco phone

* dies  

Any ideas ???

Regards Mick 



-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of
andrewg at felinemenace.org
Sent: Saturday, 11 October 2003 9:54 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] voicetronix


Yes, I have. 

Ahh, lets see:
- I grabbed the redhat kernel src rpm, and recompiled.
- I then setup the vpb driver.
- Oh, a big thing. when you get the cards, MAKE SURE the revision is
greater 
  than 19, otherwise it doesn't detect line drops correctly.
- And uhm. lets see. I had problems getting asterisk to correctly dial a
number,
  where as gnugk could dial numbers fine.

Lets see. Thats pretty much the big things. It was recommended that the
digium hardware be used, due to its more likely to work. But uhm.
Overall, 
it worked for me, when I was doing that stuff (I nolonger work where I
used to).

Thanks,
Andrew Griffiths

P.S This was typed while a bit drunk. So ignore the typos. Thanks.

On Sat, Oct 11, 2003 at 07:07:46PM +0930, mick at netexpress.com.au wrote:
> anyone out there got * to work with
> 
> a voicetronix openline4 card ???
> 
> 
> 
> 
> Regards Mick
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users