[Asterisk-Users] IAX Not working between machines

[Andrew Joakimsen]

I lost that when I re-arranged the configuration, but the problem to
start with was that the name between brackets in IAX.conf was not the
same as the username, even if I had a user= line in there.


> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Jared Davies
> Sent: Friday, October 10, 2003 11:09 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] IAX Not working between machines
> 
> try adding:
> host=dynamic
> 
> to the definition of the user in iax.conf
> 
> Andrew Joakimsen wrote:
> 
> >I double checked the contexts and they are all using the same context
> >right now.
> >
> >I also just notied this message:
> >
> >NOTICE[9226]: File chan_iax2.c, Line 2855 (register_verify): Peer
> >USERNAME is not dynamic (from 66.156.244.159)
> >
> >
> >
> >
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users