[Asterisk-Users] X100P Config

[TeleSIP]

LeterheadThe FAQ at digium explains how to do it:

http://www.digium.com/index.php?menu=faq#Configuration_7

----- Original Message ----- 
From: David J Carter
To: asterisk-users at lists.digium.com
Sent: Friday, October 10, 2003 5:29 PM
Subject: RE: [Asterisk-Users] X100P Config


Hi,

I can see the card with a cat /proc/pci.

I don't seem to have a zaptel.conf file in the etc directory.


Dave

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Glenn Dalgliesh
Sent: 10 October 2003 19:22
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] X100P Config

What do you have configured in your /etc/zaptel.conf *
/etc/asterisk/zapata.conf file. Also, submit a cat /proc/pci this should
show a device Tiger Jet Network Inc. if the pci bus recognized the card.

----- Original Message ----- 
From: David J Carter
To: asterisk-users at lists.digium.com
Sent: Friday, October 10, 2003 2:05 PM
Subject: [Asterisk-Users] X100P Config


Hiya all,

I have just received my X100P telco card and I don't seem to be able to talk
to it.

I am a bit of a numpty on Linux being from the Windows (wash my mouth with
soap and water) background, so any help would be appreciated.

I have checked under YaST2 and I think it can see the card, but not sure.

My * box is talking between 2 Grandstream phones no probs but now I would
like to talk to the outside world.

Thanks in anticipation.


Dave