[Asterisk-Users] Xten X-lite codec problem ???

[WipeOut]

Areski wrote:

>Hello folks,
>
>
>I trying to get working my xten (X-lite V2) working with Asterisk !!!
>It's working nice with my development server without nat but NO in my
>production server with "NAT=yes" !!!
>
>
>Below my client configuration for asterisk:
>[general]
>port = 5060                     ; Port to bind to
>bindaddr = 0.0.0.0              ; Address to bind to
>context = default               ; Default for incoming calls
>allow=all
>
>[phone1]
>type=friend
>host=dynamic
>username=phone1
>secret=phone1
>mailbox=9999; Mailbox for message waiting indicator
>context=demo
>callerid="Windows" <2124>
>
>
>My X-lite is configured how I read in some old threads
>
>Under System Settings>Network
>1- Set the IP of you * box in "Outbound SIP Proxy"
>
>Under System Settings>Sip Proxy
>
>1- Enable yes
>2- Username (the name or number in your SIP.CONF [brackets]
>3- Leave Authorized User blank (and remark out in SIP.CONF if you have
>it in
>there.)
>4- Obviously set the password
>5- Domain/Realm: the IP of your * box.
>6- Sip Proxy: the IP of your * box.
>7- Send Internal IP: ON
>
>
>When I use the dev server is working correctly... but to the production
>server, however it is seems to work fine in asterisk side (if I check
>the console mode, or sip trace) but I don't hear anything in the client
>X-lite...
>
>I don't understand why cause the only things I changed is "nat=yes"...
>
>A bit of help will be really welcome,
>Ares
>
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>
Try changing

Send Internal IP: ON
to
Send Internal IP: Default or OFF