[Asterisk-Users] Budgettone + G729

[Dave Alan Caruana]

many thanks!
it's all pretty much a hit & miss process
becaues of Asterisk's notorious lack of documentation..

I will try this out at my client tomorrow,
fingers crossed.

cheers
Dave

----- Original Message -----
From: "T Aksoy" <tan at yointernet.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, October 03, 2003 1:25 PM
Subject: RE: [Asterisk-Users] Budgettone + G729


> Hi,
>
> Unless there has been a recent change, you can't set codecs in the
sip.conf
> on a per-context basis. The way to do what you want is to have the
following
> in the [general] area:
>
> disallow=all
> allow=ulaw
> allow=alaw
> allow=g729
>
> Then, set all the codec preferences on the g729 phone to g729. That phone
> should then only be able to negotiate g729. If this doesn't work then I
> suspect some sort of g729 codec installation error?
>
> Tan
>
>
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Dave Alan
> Caruana
> Sent: 03 October 2003 11:49
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Budgettone + G729
>
>
> hi there ..
> I asked sometime ago regarding getting a Budgettone
> working with Asterisk over G729.
>
> My system is quite simple, Asterisk server with 1 G 729 license
> installed, and 10 Grandstream phones. Only one of them needs
> G729, because it's on a remote link via an ADSL bridge. The
> rest run happily on G711 on a local network.
>
> I added the lines
>
> disallow=all
> allow=g729
>
> to the sip.conf entry for that particular phone,
> but it doesn't seem to have made any difference.
> If I remove the "allow = g729" line, which supposedly
> should leave no codecs at all, the phone still works,
> on G711. With the allow=g729 line in place, and switching
> off all codec options except g729 from the phone, when
> I try to for example dial extension 1000, which should
> give me Asterisk's welcome message, I get a message
> about "no matching codecs" on the asterisk console,
> so obviously the g729 codec isn't working.
>
> Can somebody help?
>
> cheers
> Dave
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users