[Asterisk-Users] Re: Help with Zhone z-plex 10 reset

[Yifang Dai]

I've found out how to accomplish this... I'm sending this to the list
in case someone need this too:

Disclaimer: this worked for me, no warranty provided etc...

* Disconnect the power

* Open the cover

* In the middle, there's a JP1, with three pins, one side is marked DBUG
(pin 1), find a regular jumer, and jump pin 1 & 2.

* Connect the power, in the terminal connected to the  serial port,
you'll see you're now dropped in the debug console immediately

* you can type ? or h to get a list of help command

* the commands worked for me are to erase both data storage 1 and 2:

e s 1
e s 2

* then remove the jumber, and type q

* now zhone boots up to it's default config, and I can login as
admin/zhone again


Happy hacking :)


On Tue, Sep 30, 2003 at 10:09:12PM -0400, Yifang Dai wrote:
> I've just received a brand new zhone z-plex 10b. At first, I was able to
> login using the default (admin/zhone), and started exploring with
> the configuration, trying to set it up to work with the TE410P. 
> 
> Somehow the admin password was changed, but I don't
> know what it is anymore. So now I'm stuck at the login prompt, and can't
> get back to the CLI.... Is there a way to reset the unit to factory
> default? Or get to the CLI without the password? Thanks in advance for the help...
> 
> 
> Yifang

-- 
Yifang Dai		 |
eFax: (847)628-0255      |    Debian GNU/Linux
yifang_dai at yahoo.com     |