[Asterisk-Users] (still) channel problems

[Paulo H. Mannheimer]

No interrupts are being shared ;-(

take a look 

           CPU0
  0:     155590          XT-PIC  timer
  1:          3          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:    1534436          XT-PIC  wcfxo
  4:      49926          XT-PIC  serial
  7:    1534528          XT-PIC  wcfxo
  8:          1          XT-PIC  rtc
  9:      44112          XT-PIC  eth0
 10:    1524594          XT-PIC  wcfxs
 11:    1534575          XT-PIC  wcfxo
 12:          0          XT-PIC  PS/2 Mouse
 14:      14536          XT-PIC  ide0
NMI:          0
LOC:          0
ERR:          0
MIS:          0

> On Wed, 2003-10-01 at 06:32, Paulo Mannheimer wrote:
> > Hi folks,
> > 
> > I'm still having the following problem, maybe someone can help me out of
> > it.
> > 
> > Two IDENTICAL MACHINES (same motherboard, same RH 7.2, same *)
> > communicate through IAX2. Everything works ok on machine 1. On machine
> > 2, if I try to use 4 fxo's from a TDM400 card, sound gets lousy. If I
> > manually destroy one of the zap channels (e.g. zap destroy channel 4),
> > sound gets good again.
> > 
> 
> Did you check interrupts?  Try "cat /proc/interrupts" and see if
> anything is sharing an interrupt.
> 
> Jared Smith
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>