[Asterisk-Users] RE: Grandstream BT-100 and

[Greg Varga]

Hey Daniel,

Try out the latest CVS and let me know if your problem goes away.  We
put in a fix for a SIP problem that might be related to this.

Thanks,
  --Greg

On Fri, 28 Nov 2003 00:49:20 +0100, Daniel Chabrol wrote:

>>I was successfully using the BT-100 phone with CVS 11/10.  Now that I've
>>upgraded to 11/27, I can't place an outbound call.  However the phone is
>>registered and works well with inbound calls.  Any suggestions will be
>>appreciated.  Thank you.
>
>Hi!
>
>I encounter similar problems. But in my case also incomming calls are not possible. But this might be because of my upgrade to the latest bt-100 beta-firmware (b13p4.22)! Additionally I can't call internal extensions (for example the echo test). Currently i'm using the Asterisk-CVS from 27.11.2003. If i use a softphone (x-lite from x-ten) to connect to * it works perfectly in the same constallation (all with static ip-adresses).
>
>Daniel
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users

-------------------------------------
Greg Varga
Author for RocketryNews
http://www.rocketrynews.com
CAR # 677
-------------------------------------