[Asterisk-Users] Re: MGCP problem

[Darren McIntosh]

> Message: 1
> From: "Sergi Gabunia" <sg at wanex.net>
> To: <asterisk-users at lists.digium.com>
> Date: Thu, 27 Nov 2003 12:05:15 +0400
> Subject: [Asterisk-Users] MGCP problem
> Reply-To: asterisk-users at lists.digium.com
>
> I have VOIP network built with MGCP endpoints.The manufacturer of =
> endpoints is ASKEY. I downloaded latest Asterisk software and found it =
> very useful for me. I configured it and it seems taht everything works =
> OK when I am testing it with one or two endpoints. After that I tried to =
> move Asterisk to working network and replace existing call manager. It =
> starts working and calls are proceeding but after a while I could not =
> hear a dialtone and saw in logs the following:
> Nov 27 11:40:57 WARNING[10251]: File chan_mgcp.c, Line 2127 =
> (handle_hd_hf): Unable to create switch thread: Interrupted system call
>
> I looked in chan_mgcp.c file and saw that this error occures after =
> pthread_create functions and it means that this "system call was =
> interrupted permaturely with a signal before it was able to complete".=20
>
> Please, help me to resolve this problem.
>
> Best regards,
> Sergi Gabunia
>
I am using v1.29 of chan_mgcp.c with the askey unit and I can see a similar
problem with memory not being released after off hook/on hook transition.
Anybody fill me in on what debugging data would be useful in identifying
this problem?

darren