[Asterisk-Users] RxFax
Lists
lists at uc9.net
Sun Nov 23 09:06:13 MST 2003
If someone has gotten this to work, it would be GREAT if they could put a
HOWTO in the wiki, or just post it to the list.
Michael
On Sun, 23 Nov 2003, Dan Fernandez wrote:
> I am also having problems receiving my first fax. I get a 320byte file (for a
> 4 page fax). If I look a the tiff generated, is just has some few dots.
>
> I am sending the fax from a notebook with Windows XP to an X100P and using
> libtiff v3.5.7.
>
> Has anyone successfully received faxes ?
>
> Output to the console as follows:
>
> Changed from phase 0 to 1
> > Start receiving document
> > Changed from phase 1 to 4
> > Sending ident
> > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20
> > 20
> > DIS:
> > Store and forward Internet fax: no
> > Real-time Internet fax: no
> > Preferred octets: 256
> > Can receive fax
> > Data signalling rate: V.29
> > R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> > 2D coding OK
> > Scan line length: 215mm
> > Recording length: A4 (297mm)
> > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> > R8x15.4lines/mm OK
> > Inch-based resolution preferred: no
> > Metric-based resolution preferred: no
> > Minimum scan line time for higher resolutions: T15.4 = T7.7
> > >>> DIS: 80 00 c6 f0 80 80 01
> > HDLC underflow in state 9
> > Changed from phase 4 to 3
> > <<< TSI: 43 20 20 20 20 20 37 39 36 39 36 33 32 20 31 31 39 20 39 34
> > 2b
> > TSI without final frame tag
> > Remote fax gave TSI as: "+49 911 2369697 "
> > <<< DCS: 83 00 46 f0 00
> > DCS with final frame tag
> > In state 9
> > DCS:
> > Store and forward Internet fax: no
> > Real-time Internet fax: no
> > Can receive fax
> > Data signalling rate: V.29, 9600bps
> > R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> > Scan line length: 215mm
> > Recording length: A4 (297mm)
> > Minimum scan line time: 0ms
> > Get at V.29
> > Changed from phase 3 to 5
> > Fast carrier up
> > Fast carrier down
> > Changed from phase 5 to 4
> > 0 bad bits in trainability test
> > Start rx document - compression 1
> > Start rx page
> > >>> CFR: 84
> > HDLC underflow in state 5
> > Post trainability
> > Changed from phase 4 to 5
> > Fast carrier up
> > Fast carrier down
> > Fast carrier up
> > Fast carrier down
> > Fast carrier up
> > Equalizer state:
> > -7 ( 0.00000, 0.00000) -> 0.00000
> > -6 ( 0.00000, 0.00000) -> 0.00000
> > -5 ( 0.00000, 0.00000) -> 0.00000
> > -4 ( 0.00000, 0.00000) -> 0.00000
> > -3 ( 0.00000, 0.00000) -> 0.00000
> > -2 ( -0.08332, -0.68161) -> 0.47154
> > -1 ( 0.66136, 0.74688) -> 0.99522
> > 0 ( 0.83336, 2.86588) -> 8.90777
> > 1 ( 0.66136, 0.74688) -> 0.99522
> > 2 ( -0.08332, -0.68161) -> 0.47154
> > 3 ( 0.00000, 0.00000) -> 0.00000
> > 4 ( 0.00000, 0.00000) -> 0.00000
> > 5 ( 0.00000, 0.00000) -> 0.00000
> > 6 ( 0.00000, 0.00000) -> 0.00000
> > 7 ( 0.00000, 0.00000) -> 0.00000
> > Equalizer state:
> > -7 ( 0.24872, -0.01973) -> 0.06225
> > -6 ( 0.06295, -0.59891) -> 0.36265
> > -5 ( 0.04198, -0.41768) -> 0.17622
> > -4 ( 0.12922, 0.34088) -> 0.13290
> > -3 ( 0.29121, 0.41776) -> 0.25932
> > -2 ( 0.05779, -1.18501) -> 1.40758
> > -1 ( 0.67094, -0.35069) -> 0.57314
> > 0 ( 0.60670, 2.23125) -> 5.34655
> > 1 ( 0.34490, 1.36992) -> 1.99564
> > 2 ( -0.31233, 0.09159) -> 0.10594
> > 3 ( -0.00825, 0.00787) -> 0.00013
> > 4 ( 0.02226, -0.47177) -> 0.22306
> > 5 ( -0.17953, 0.14528) -> 0.05334
> > 6 ( -0.25318, 0.57800) -> 0.39819
> > 7 ( -0.10465, 0.05659) -> 0.01415
> > Equalizer state:
> > -7 ( 0.10674, 0.25606) -> 0.07696
> > -6 ( -0.05000, -0.10084) -> 0.01267
> > -5 ( -0.04246, -0.24755) -> 0.06308
> > -4 ( 0.01990, 0.30283) -> 0.09210
> > -3 ( -0.04673, 0.31177) -> 0.09939
> > -2 ( -0.20575, -0.84531) -> 0.75687
> > -1 ( 0.53295, 0.18096) -> 0.31678
> > 0 ( 0.84089, 2.50094) -> 6.96180
> > 1 ( 0.69048, 1.16134) -> 1.82547
> > 2 ( -0.06589, -0.16464) -> 0.03145
> > 3 ( -0.04671, 0.30535) -> 0.09542
> > 4 ( 0.07891, -0.09615) -> 0.01547
> > 5 ( 0.10829, 0.05362) -> 0.01460
> > 6 ( -0.01236, 0.00810) -> 0.00022
> > 7 ( -0.08830, -0.09249) -> 0.01635
> > Fast carrier training failed
> > Equalizer state:
> > -7 ( 0.08400, 0.24069) -> 0.06499
> > -6 ( -0.05179, -0.10933) -> 0.01464
> > -5 ( -0.02255, -0.26286) -> 0.06961
> > -4 ( 0.04164, 0.27170) -> 0.07555
> > -3 ( -0.03724, 0.29333) -> 0.08743
> > -2 ( -0.20480, -0.81299) -> 0.70289
> > -1 ( 0.53419, 0.24509) -> 0.34543
> > 0 ( 0.84121, 2.52376) -> 7.07701
> > 1 ( 0.69373, 1.10336) -> 1.69865
> > 2 ( -0.06297, -0.24132) -> 0.06220
> > 3 ( -0.04496, 0.29784) -> 0.09073
> > 4 ( 0.07737, -0.04681) -> 0.00818
> > 5 ( 0.10254, 0.07906) -> 0.01677
> > 6 ( -0.01690, -0.01146) -> 0.00042
> > 7 ( -0.07915, -0.10751) -> 0.01782
> > Fast carrier down
> > Fast carrier up
> > Fast carrier down
> > Fast carrier up
> > Equalizer state:
> > -7 ( 0.00000, 0.00000) -> 0.00000
> > -6 ( 0.00000, 0.00000) -> 0.00000
> > -5 ( 0.00000, 0.00000) -> 0.00000
> > -4 ( 0.00000, 0.00000) -> 0.00000
> > -3 ( 0.00000, 0.00000) -> 0.00000
> > -2 ( 0.61133, -0.27793) -> 0.45097
> > -1 ( -0.43835, 0.84731) -> 0.91009
> > 0 ( -2.31756, 1.80492) -> 8.62880
> > 1 ( -0.43835, 0.84731) -> 0.91009
> > 2 ( 0.61133, -0.27793) -> 0.45097
> > 3 ( 0.00000, 0.00000) -> 0.00000
> > 4 ( 0.00000, 0.00000) -> 0.00000
> > 5 ( 0.00000, 0.00000) -> 0.00000
> > 6 ( 0.00000, 0.00000) -> 0.00000
> > 7 ( 0.00000, 0.00000) -> 0.00000
> > Equalizer state:
> > -7 ( 0.00818, 0.03120) -> 0.00104
> > -6 ( 0.07270, -0.07606) -> 0.01107
> > -5 ( 0.01689, -0.01715) -> 0.00058
> > -4 ( -0.06603, 0.09601) -> 0.01358
> > -3 ( -0.00078, 0.03254) -> 0.00106
> > -2 ( 0.67282, -0.34295) -> 0.57030
> > -1 ( -0.41326, 0.81542) -> 0.83569
> > 0 ( -2.35739, 1.88459) -> 9.10897
> > 1 ( -0.47385, 0.89274) -> 1.02152
> > 2 ( 0.66060, -0.32344) -> 0.54101
> > 3 ( 0.06634, -0.05122) -> 0.00702
> > 4 ( 0.03091, 0.02680) -> 0.00167
> > 5 ( -0.06306, 0.04044) -> 0.00561
> > 6 ( -0.05027, -0.02251) -> 0.00303
> > 7 ( 0.01188, -0.04938) -> 0.00258
> > Equalizer state:
> > -7 ( -0.03674, 0.08108) -> 0.00792
> > -6 ( 0.02190, -0.03417) -> 0.00165
> > -5 ( 0.17291, -0.04283) -> 0.03173
> > -4 ( -0.15382, 0.12185) -> 0.03851
> > -3 ( -0.35867, 0.15722) -> 0.15336
> > -2 ( 0.51201, -0.37913) -> 0.40589
> > -1 ( 0.19916, 0.06553) -> 0.04396
> > 0 ( -0.94589, 0.50279) -> 1.14751
> > 1 ( 0.58356, -0.39777) -> 0.49876
> > 2 ( 0.68458, -0.37782) -> 0.61140
> > 3 ( -0.76024, 0.78642) -> 1.19643
> > 4 ( -1.25772, 1.36848) -> 3.45461
> > 5 ( -0.89550, 0.93134) -> 1.66931
> > 6 ( -0.21534, 0.13414) -> 0.06437
> > 7 ( 0.06066, -0.04375) -> 0.00559
> > Fast carrier training failed
> > Equalizer state:
> > -7 ( -0.04692, 0.06585) -> 0.00654
> > -6 ( 0.00497, -0.05269) -> 0.00280
> > -5 ( 0.17107, -0.06367) -> 0.03332
> > -4 ( -0.13687, 0.10693) -> 0.03017
> > -3 ( -0.33936, 0.15967) -> 0.14066
> > -2 ( 0.52118, -0.36886) -> 0.40769
> > -1 ( 0.19544, 0.06510) -> 0.04243
> > 0 ( -0.96066, 0.48543) -> 1.15851
> > 1 ( 0.55690, -0.41091) -> 0.47898
> > 2 ( 0.65487, -0.36945) -> 0.56534
> > 3 ( -0.77628, 0.81027) -> 1.25915
> > 4 ( -1.24782, 1.38390) -> 3.47224
> > 5 ( -0.87525, 0.93049) -> 1.63188
> > 6 ( -0.21764, 0.13199) -> 0.06479
> > 7 ( 0.02438, -0.02759) -> 0.00136
> > Fast carrier down
> > Fast carrier up
> > Fast carrier down
> > Fast carrier up
> > Fast carrier down
>
>
>
More information about the asterisk-users
mailing list