[Asterisk-Users] TE410P Errors under load

[Scott Stingel]

Yes it is different, the E1 crossover cable pairs 1+2 with 4+5.

What I meant was that you can make a crossover by cutting up a CAT5 cable
and redoing two pair (I wan't clear)

Cheers
Scott

Scott M. Stingel 
Emerging Voice Technology Inc.

Email:          scott at evtmedia.com <mailto:scott at evtmedia.com>   
URL:            www.evtmedia.com <http://www.evtmedia.com>   



> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> Ray Burkholder
> Sent: Saturday, November 22, 2003 6:43 PM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] TE410P Errors under load
> 
> 
> Might you be getting problems because you are using an 
> Ethernet cable?  If
> my memory serves correctly, an Ethernet cable is paired 
> differently than an
> E1/T1 cable.
> 
> > call generation Perl script for you to try.  You would need 
> > one E1 crossover
> > cable:  (This is simple to construct from a CAT5 Ethernet 
> > patch cable).  I
> > can make the problem occur with only 30 sending and receiving 
> > channels on
> > the same system... THANKS!
> > 
> 
> 
> -- 
> Scanned for viruses and dangerous content at 
> http://www.oneunified.net and is believed to be clean.
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>