[Asterisk-Users] RE: Solved! Snom 200 Busy signal

[Matt Lawson]

Now that you mention it, I did observe the PUBLISH message. Can someone 
please tell me exactly the change that was made that fixed this? 
(file/lines) I can do a diff -r and see a few changes from CVS but I'd 
like to be sure. We have a lot of custom changes as well so it's 
non-trivial to update to CVS. I would definitely like to check on this 
one patch though. Thanks. - Matt -----Original Message-----

>>From: asterisk-users-admin at lists.digium.com
>  
>
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Matt Lawson

>>Sent: Thursday, November 20, 2003 7:03 PM
>>To: asterisk-users at lists.digium.com
>>Subject: [Asterisk-Users] Solved! Snom 200 Busy signal
>  
>


>>As a follow up to my earlier posting, the problem with the Snom 200
>  
>
Busy 

>>signal was the firmware!  I reverted back to 1.16x and everything's OK
>  
>

>>- Matt
>  
>



>I had the same type of problem you did when I first upgraded to 2.02t.
>But I did a CVS update on 11/19/03, and everything is fine now. What I
>did notice (and I have a customer that saw the same thing) is that that
>been able to determine what they're publishing with it. But Asterisk
>didn't seem to like it until I did a CVS update. It didn't seem to
>respond to it. Now Asterisk sends back a "Status: 405 Method Not
>Allowed" message, and everything is fine. I can't definitively say this
>was the cause because I didn't go back to the old Asterisk code and
>verify. But I can tell you that my Snom 200 phones with version 2.02t
>work fine now.
>
>Jerry