[Asterisk-Users] Solved! Snom 200 Busy signal

[Jerry Gibson]

-----Original Message-----
>From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Matt Lawson
>Sent: Thursday, November 20, 2003 7:03 PM
>To: asterisk-users at lists.digium.com
>Subject: [Asterisk-Users] Solved! Snom 200 Busy signal


>As a follow up to my earlier posting, the problem with the Snom 200
Busy 
>signal was the firmware!  I reverted back to 1.16x and everything's OK.

>That made today pretty complicated, since I already had a new kernel
and 
>a new Asterisk build I was trying all at once....

>Hopefully someone else will benefit...

>- Matt



I had the same type of problem you did when I first upgraded to 2.02t.
But I did a CVS update on 11/19/03, and everything is fine now. What I
did notice (and I have a customer that saw the same thing) is that that
version 2.02t has added a new SIP "Publish" message. I still haven't
been able to determine what they're publishing with it. But Asterisk
didn't seem to like it until I did a CVS update. It didn't seem to
respond to it. Now Asterisk sends back a "Status: 405 Method Not
Allowed" message, and everything is fine. I can't definitively say this
was the cause because I didn't go back to the old Asterisk code and
verify. But I can tell you that my Snom 200 phones with version 2.02t
work fine now.

Jerry