[Asterisk-Users] T1 / Channel Bank Configuration

[PBX]

I know this topic has been covered before - I just want to make sure I
am understanding this correctly.


	|                 -------------------
	|                |		       |
	| T1             |    Channel Bank   |
	|      ----------| 		       |
	|     | T1 Cross |		       |
	|     |          |   		       |
	|     |	      -------------------
  --------------
 |  Asterisk    |
 |              |
 |  2 T1 Cards  |
 |		    |
 |		    |
 |		    |
  --------------

With this setup what should the zaptel & zapata configs look like.....


zaptel.conf -

span=1,0,0,esf,b8zs 
E&M=1-24 (I am going to be doing DID/DOD Lines)

zapata.conf -

signalling=fxo_ks
context=blah
group=1
channel => 1-24


Here is where my confusion comes in.  Under Zaptel.conf it appears that
you are just configuring the first card.  If this is so, do you not need
to configure the second card with any type of signaling?  Then on the
channel bank what type of signaling is configured there?

I am going to be setting this configuration up in the next couple of
weeks and just want to make sure I have the configuration and concept
correct.

-gcc