[Asterisk-Users] Still TDM400P problem

[JanM]

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> Michiel Betel
> Sent: den 20 november 2003 11:24
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Still TDM400P problem
> 
> 
> JanM wrote:
> 
> >Hi again all,
> >
> >I have searched the list for help with my problem but I 
> can´t find an 
> >answer. I only manage to get one port of my TDM400P card working.
> >
> >When I do dmesg I get following, seems like four discovered ports:
> >---------------
> >Zapata Telephony Interface Registered on major 196
> >PCI: Found IRQ 11 for device 02:00.0
> >PCI: Sharing IRQ 11 with 02:07.1
> >PCI: Sharing IRQ 11 with 02:0c.0
> >Freshmaker version: 63
> >Freshmaker passed register test
> >Module 0: Installed -- AUTO
> >Module 1: Installed -- AUTO
> >Module 2: Installed -- AUTO
> >Module 3: Installed -- AUTO
> >Found a Wildcard FXS: Wildcard TDM400P REV E/F (4 modules) 
> Registered 
> >tone zone 5 (Finland)
> >----------------
> >
> >But when I do ztcfg -vv I only get one port configured:
> >----------------
> >Zaptel Configuration
> >======================
> >Channel map:
> >Channel 01: FXO Kewlstart (Default) (Slaves: 01)
> >1 channels configured.
> >----------------
> >
> >How do I configure/load the rest of the ports?
> >  
> >
> Add them in /etc/zaptel.conf... ztcfg reads this file and 
> configures zap 
> ports accordingly
> 
> Michiel

When I try that I get an error:
"Ouch ... error while writing audio data: : Broken pipe"

This works:
zaptel.conf
fxoks=1
loadzone=fi
defaultzone=fi

Zapata.conf
[channels]
group=1
context=internt
signalling=fxo_ks
channel=1

But when I try to set up more ports/channels on the first card it stops
working.
The following configuration doesn´t makes the "Ouch..." error:
zaptel.conf
fxoks=1-4
loadzone=fi
defaultzone=fi

Zapata.conf
[channels]
group=1
context=internt
signalling=fxo_ks
channel=1-4

What does it mean with "audio data" in the error message?

---JanM---