[Asterisk-Users] DIAX - Can place a call, but can't be called?!

[Dan]

Hi,

----- Original Message ----- 
From: "Todd Taylor" <todd at valleytelecommunications.com>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, November 18, 2003 6:22 PM
Subject: [Asterisk-Users] DIAX - Can place a call, but can't be called?!


> Greetings,
>
> DIAX seems to work well placing calls, but I can't actually receive a
> call . Here, DIAX (x305) "registers", then I use a sip phone to place a
> call to DIAX (which definitely is not in use by me at debug time, but it
> is idle on my desktop.I think), and then * goes to vmail.
>
> Here's the debug output:
>
> affinity*CLI> iax debug
> IAX Debugging Enabled
> Rx-Frame Retry[N/A] -- Seqno: 00  Type: IAX     Subclass: REGREQ
> Tx-Frame Retry[-01] -- Seqno: 00  Type: IAX     Subclass: ACK
> Tx-Frame Retry[000] -- Seqno: 00  Type: IAX     Subclass: REGAUTH
> Rx-Frame Retry[N/A] -- Seqno: 00  Type: IAX     Subclass: REGREQ
> Tx-Frame Retry[-01] -- Seqno: 00  Type: IAX     Subclass: ACK
> Rx-Frame Retry[N/A] -- Seqno: 00  Type: IAX     Subclass: ACK
> Rx-Frame Retry[N/A] -- Seqno: 01  Type: IAX     Subclass: REGREQ
> Tx-Frame Retry[-01] -- Seqno: 01  Type: IAX     Subclass: ACK
>     -- Registered '305' (AUTHENTICATED) at 192.168.1.102:5036
> Tx-Frame Retry[000] -- Seqno: 01  Type: IAX     Subclass: REGACK
> Rx-Frame Retry[N/A] -- Seqno: 01  Type: IAX     Subclass: ACK
>     -- Executing Macro("SIP/302-b3b3", "oneline|IAX/305") in new stack
>     -- Executing Dial("SIP/302-b3b3", "IAX/305|20|tr") in new stack
>   == Everyone is busy at this time
>     -- Executing VoiceMail("SIP/302-b3b3", "b305") in new stack
>   == Parsing '/etc/asterisk/voicemail.conf':   == Parsing
> '/etc/asterisk/voicemail.conf': Found
>     -- Playing 'vm/305/busy' (language 'en')
>   == Spawn extension (macro-oneline, s, 102) exited non-zero on
> 'SIP/302-b3b3' in macro 'oneline'
>   == Spawn extension (toll-access, s, 1) exited non-zero on
> 'SIP/302-b3b3'
> affinity*CLI> iax no debug
>
> What is creating the 'busy' state?  FYI, I'm not having trouble with any
> other FXS or SIP phones, just DIAX.  I've tried using * builds from last
> week and one from a couple weeks prior with no luck.

Very strange....
There is any (personal)firewall on the pc running DIAX (or if the OS is XP
Pro, it is activated the internal one)?
If yes, take care to open the UDP port 5036..

Best regards,
Dan