[Asterisk-Users] FX-200 VOIP PORT CONVERTER FXS to FXO

[Brian West]

Also keep in mind if you don't come straight from the dmarc to the x100p
you might have echo also:

PSTN  ====== X100P ==> * SERVER
        |
        |
      PHONE

If you do the above you will get mad echo in some cases. :P

I have 3 x100p's with only about 3-5 seconds of echo at the begining of
the call.

bkw

On Sun, 16 Nov 2003,  John Brown (CV) wrote:

> Ok, then I'd suggest that you need to carefully comb thru
> your echo settings.
>
> Keep in mind that you will need to STOP NOW  your server for
> hardware changes.  Some will disagree with this, but thats been
> my experience.
>
> Like JerJer, I've got boxes with X100P cards and no echo issues
> once I got TIP/RING and echo settings correct.
>
> john brown
> chagres technologies
>
>
>
> On Sun, Nov 16, 2003 at 02:18:55PM -0500, Kevin wrote:
> > Just to be sure again, I did a reversal on the tip and ring with no
> > improvement.
> >
> > -----Original Message-----
> > From: John Brown (CV) [mailto:jmbrown at chagresventures.com]
> > Sent: Sunday, November 16, 2003 1:54 PM
> > To: asterisk-users at lists.digium.com
> > Subject: Re: [Asterisk-Users] FX-200 VOIP PORT CONVERTER FXS to FXO
> >
> > The echo issues are line or PSTN.
> >
> > make sure your tip and ring are correctly wired.  Polarity
> > does matter and teh X100P does not do polarity fixing like
> > most consumer phones today.
> >
> > john brown
> > chagres technologies, inc
> > http://www.chagres.net/products/voip/
> >
> >
> > On Sun, Nov 16, 2003 at 01:35:13PM -0500, Kevin wrote:
> > > I do support Asterisk. I have a TDM40B and X100P from Digium, I can't
> > > take the echo on the X100P.
> > >
> > > -----Original Message-----
> > > From: Jeremy McNamara [mailto:jj at nufone.net]
> > > Sent: Sunday, November 16, 2003 1:27 PM
> > > To: asterisk-users at lists.digium.com
> > > Subject: Re: [Asterisk-Users] FX-200 VOIP PORT CONVERTER FXS to FXO
> > >
> > > Kevin wrote:
> > >
> > > >Has anyone seen an FXO converter for a Cisco ATA.  There is someone
> > > >selling a device on Ebay that claims to convert a Cisco ATA FXS port
> > to
> > > >an FXO.
> > > >
> > > >FX-200 VOIP PORT CONVERTER FXS to FXO
> > > >
> > > >http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3057281388
> > > >
> > > >
> > >
> > > Don't bother. Support Asterisk and pick up a X100P from Digium. You
> > will
> > >
> > > have more hair and less stress.
> > >
> > >
> > > Jeremy
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>