[Asterisk-Users] FX-200 VOIP PORT CONVERTER FXS to FXO

[Kevin]

Just to be sure again, I did a reversal on the tip and ring with no
improvement.

-----Original Message-----
From: John Brown (CV) [mailto:jmbrown at chagresventures.com] 
Sent: Sunday, November 16, 2003 1:54 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] FX-200 VOIP PORT CONVERTER FXS to FXO

The echo issues are line or PSTN.

make sure your tip and ring are correctly wired.  Polarity 
does matter and teh X100P does not do polarity fixing like
most consumer phones today.

john brown
chagres technologies, inc
http://www.chagres.net/products/voip/


On Sun, Nov 16, 2003 at 01:35:13PM -0500, Kevin wrote:
> I do support Asterisk. I have a TDM40B and X100P from Digium, I can't
> take the echo on the X100P.
> 
> -----Original Message-----
> From: Jeremy McNamara [mailto:jj at nufone.net] 
> Sent: Sunday, November 16, 2003 1:27 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] FX-200 VOIP PORT CONVERTER FXS to FXO
> 
> Kevin wrote:
> 
> >Has anyone seen an FXO converter for a Cisco ATA.  There is someone
> >selling a device on Ebay that claims to convert a Cisco ATA FXS port
to
> >an FXO.
> >
> >FX-200 VOIP PORT CONVERTER FXS to FXO
> >
> >http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3057281388
> >  
> >
> 
> Don't bother. Support Asterisk and pick up a X100P from Digium. You
will
> 
> have more hair and less stress.
> 
> 
> Jeremy
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users