[Asterisk-Users] Bad echo on outgoing calls

[Iain Stevenson]

You'll probably need clean builds of zaptel and asterisk - I tried with 
updates earlier today and the echotraining option wasn't recognised until I 
did a complete clean install.

  Iain



--On Saturday, November 15, 2003 13:59:13 -0800 Andrew Gillham 
<gillham at vaultron.com> wrote:

> Andrew Joakimsen wrote:
>
>> The X100P cards have horrible echo problems. I've heard talk about this
>> being fixed, but havent seen anything done about it.
>>
>>
>>
>>> -----Original Message-----
>>> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
>>> admin at lists.digium.com] On Behalf Of Larry D. Black
>>> Sent: Saturday, November 15, 2003 3:55 PM
>>> To: asterisk-users at lists.digium.com
>>> Subject: [Asterisk-Users] Bad echo on outgoing calls
>>>
>>> I have just installed and configured asterisk I have been playing with
>>> software phones and an analog phone plugged into a TDM card. I have
>>>
>>>
>> one
>>
>>
>>> line coming in on a X100P card.
>>>
>>>
>
> My X100P works quite well if I don't adjust the gain.  Unfortunately it
> is a bit on the quiet side without the adjustment.
>
> I'll test it out with the echotraining and the gain settings.  In the
> past with gain enabled, the echo would correct after 5-10 seconds of
> conversation.
>
> This is with MEC2, and I tested with and without the aggressive
> suppressor.
>
> -Andrew
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>