[Asterisk-Users] Overhead Paging

Jerry Gibson jerrygib at ix.netcom.com
Fri Nov 14 10:31:07 MST 2003


Multicast would be great if all of the SIP clients would accept it. Of
course, first you have to do call setup via SIP. I hvaen't ween that
done yet for multiple phones for the same call.

Jerry

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Chris
Albertson
Sent: Friday, November 14, 2003 11:54 AM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Overhead Paging



I'd hate to see conference bridging use for paging.  A lot of 
wasted CPU and bandwidth.  Could you "multicast" the UDP packets?

We assume you don't need to page across multiple Asterisk servers but if
you did the software wuld need to be smart enough to "know" which groups
of extensions could be in a multicast and whci need to be bridged.
Basically check to see if the SIP phone are on the same subnet.


--- DUSTIN WILDES <dwildes at pabbankshares.com> wrote:
> I feel this needs to be a separate application in Asterisk, like 
> app_sipintercom The application would connect to all available 
> auto-answer SIP phones, play a short frequency tone for the intercom 
> alert, only allow one-way streaming to the phones, then disconnect all

> phones whenever the originator hangs up.
>  
> Same is true for a paging application, app_sippage
> The application should work the same as intercom, but allow two-way 
> audio streaming.
>  
> I was starting the design of these two applications unless anyone else

> has a better idea or has already begun work? Feedback welcome....
>  
>  
>  
>  
> 
> -----Original Message-----
> From: Jerry Gibson [mailto:jerrygib at ix.netcom.com]
> Sent: Friday, November 14, 2003 10:41 AM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] Overhead Paging
> 
> 
> Scott:
>  
> The operation you describe with multiple phones set to ring on the 
> same extension is correct. The first one that answers, gets it. 
> However, the meetme setup you describe also works great. I have that 
> set up for a conference bridge where one person sets up a conference 
> with one click on a web page which calls multiple Snom phones into a 
> conference. This is a full conference where everyone can talk to 
> everyone. However, The Snom phone also allows you set it up with the 
> mic permanently muted, which would work great for paging.
>  
> Jerry
>  
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Bisker, 
> Scott (7805)
> Sent: Friday, November 14, 2003 9:25 AM
> To: 'asterisk-users at lists.digium.com'
> Subject: RE: [Asterisk-Users] Overhead Paging
> 
> 
> Jerry,
>  
> Do you have it setup so that multiple phones answer one extension?  I 
> tried that setup with two Cisco phones, however, only the quickest 
> responding phone answered.  If you have a config that rings multiple 
> phones  and all of the phones answer the same call, I'd be interested 
> to see the config.  I guess theway to do it would be to setup a meetme

> conference and then dial all parties into the conference then 
> speak....
>  
> -sb
> 
> -----Original Message-----
> From: Jerry Gibson [mailto:jerrygib at ix.netcom.com]
> Sent: Friday, November 14, 2003 8:52 AM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] Overhead Paging
> 
> 
> We do the same thing with the Snom phones. They can be set up for 
> auto-answer, and they have a speaker jack in the back that is the same

> levels as a sound card on a PC. And the Snom phone automaticly hangs 
> up when the caller hang up is detected (the SIP BYE message).
>  
> Jerry
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Bisker, 
> Scott (7805)
> Sent: Thursday, November 13, 2003 6:17 PM
> To: 'asterisk-users at lists.digium.com'
> Subject: RE: [Asterisk-Users] Overhead Paging
> 
> 
> Our setup is to set the OSS device to autoanswer.  The output of the 
> soundcard feeds into a bank of overhead speakers.  If the channel is 
> in use, then the call gets put in a queue until the OSS device is 
> free.
>  
> -sb
>  
> 
>  
> 
> -----Original Message-----
> From: Johnson, Randy [mailto:rjohnson at Spang.com]
> Sent: Thursday, November 13, 2003 5:34 PM
> To: 'asterisk-users at lists.digium.com'
> Subject: [Asterisk-Users] Overhead Paging
> 
> 
> 
> Does anyone have any recommendations for overhead paging systems for 
> use with Asterisk?
> 
> Thanks,
> Randy Johnson 
> 
> 


=====
Chris Albertson
  Home:   310-376-1029  chrisalbertson90278 at yahoo.com
  Cell:   310-990-7550
  Office: 310-336-5189  Christopher.J.Albertson at aero.org
  KG6OMK

__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list