[Asterisk-Users] MGCP - Repost

[G Lin]

Hello,

question is can we use today's * MGCP function for trunk routing instead of
the MGCP client.

e.g.

exten => _X.,1,Dial,MGCP/${EXTEN}@other-softSwtich-ip

where other-sfotSwtich-ip is the IP address of another softSwitch, which
support MGCP protocol.

Please advise.

Thanks,

George

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Roy Sigurd
Karlsbakk
Sent: Friday, November 07, 2003 6:09 AM
To: Asterisk Users
Subject: Re: [Asterisk-Users] MGCP - Repost


If you mean to use MGCP clients and an E1/PRI to the telco with asterisk
as the 'origo', that's what I do, so yes.

On Fri, 2003-11-07 at 14:24, Lal, Deepak (Contractor) wrote:
> I did not get any answers to my earlier posting. I hope I have better luck
this
> time- The question: Is it possible to use Asterisk as media gateway
controller?
> I know * supports MGCP, but does that also imply that I can use * to
control any
> third party media gateway (such as one providing media conversion from E1
to
> AAL2). - DL
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users