[Asterisk-Users] Asterisk system lock

[Andres]

It also happens to us every now and then.  SIP is the cause.  Zap and IAX2 
continue to work fine but SIP dies.  Sometimes * stops responding a few 
minutes after we restart it time and time again.  It usually happens when a 
new subscriber is trying to make a call and due to his NAT or Firewall issue, 
the return SIP packets are not getting to him.  Once we clear up the NAT 
issue then Asterisk behaves normally again.  We have been unable to reproduce 
it consistently so we have not opened a bug tracket item yet.

Andres,
http://www.telesip.net

On Tuesday 04 November 2003 16:51, mattf wrote:
> Hello,
>
> In the last week I've been getting a lockup about every 2 days. during the
> lockup the people that are on the phone can keep talking, but noone can
> initiate any kind of call internal or external. I went into the manager
> interface and tried a Action: Hangup and Manager gave me a Success message
> back only to see that the Zap channel was still active in the "show
> channels" screen.
>
> When I eventually do a "stop now" it takes about 20 seconds before it
> finally stops and it says segmentation fault. then I start it back up and
> everything works fine.
>
> Does Asterisk need to be stopped and restarted regularly to not crash and
> freeze?
>
> Any ideas?
>
> I am using a CVS from October 1st and have the following config:
>
> Digium quad t1 card (400)
> P4 2.8GHZ, 2GB RAM, SCSI RAID
> RedHat 9
> 2 T1's hooked up
> 50 Grandstream phones set up.
>
> Any help would be greatly appreciated.
>
> Thanks,
>
> MATT---
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users