[Asterisk-Users] Transfer from Grandstream BT100?

[Steven M. Sokol]

I have 1.0.3.81.  How do you execute the transfer?

Thanks,

Steven

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of John Brown (CV)
Sent: Monday, November 03, 2003 8:58 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Transfer from Grandstream BT100?

what version of GS firmware are you running ?


I call from PSTN to GS, GS does xfer to XTEN, hang up GS 
call continues

if you aren't running 1.0.3.81 or newer, then upgrade :)

john brown
chagres


On Mon, Nov 03, 2003 at 06:15:02PM -0600, Steven Sokol wrote:
> Hi,
> 
> Does anybody know how to properly execute a transfer (without using the
> |Tt option) from a GS100?  Scenario:
> 
> 1.  I call from X-PRO (ext 1100) to Grandstream (1101).
> 2.  Grandstream answers.  Call is established.
> 3.  Press [TRANSFER] on the Grandstream.  X-PRO caller is put on hold.
> Grandstream gets dial tone.
> 4.  Grandstream dials 1103 (the extension of another GS100).
> 5.  Grandstream hangs up.
> 6.  Call is torn down.  BYE messages sent from GS to X-PRO.  X-PRO sends
> BYE in response.
> 
> This is the method suggested by the GS100 manual.  I have tried both
> using the [TRANSFER] and the [FLASH] keys, to no avail.  Same with
> pressing [TRANSFER] or [FLASH] to complete the transfer (instead of
> hanging up).
> 
> I can transfer calls from X-PRO without any problem.
> 
> Thanks!
> 
> Steve
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users