[Asterisk-Users] * troubles

[Dimitri Bellini]

Hi Victor 
	i have a Dual Xeon with Hyperthreading with a SuperMicro board:

00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
00:02.0 PCI bridge: Intel Corp. E7000 Series Hub Interface B PCI-to-PCI Bridge 
(rev 01)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 
02)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
01:02.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
01:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
03:01.0 Ethernet controller: Intel Corp.: Unknown device 1013
04:01.0 Communication controller: Xilinx Corporation: Unknown device 0314 (rev 
01)
04:02.0 Communication controller: Xilinx Corporation: Unknown device 0314 (rev 
01)
-------------------------------------------------------------
I use MDK 9.2 enterprise kernel (no LG CD ROM Drive :-) ) with 1GByte RAM and 
Two board TE410P i dont discovery, for the moment, any trouble.
Bye 
Dimitri 

On Monday 03 November 2003 02:22, Victor Rini wrote:
> Hello all,
>
> Been a while since I've strolled this way. Apologies in advance if this is
> a common line of questioning.
>
> I've just bought a new Intel 865G based board with a P4 Hyperthreading
> processor.
>
> I believe I've gotten SMP set up correctly: in the menuconfig I specified
> SMP and told acpi to enumerate processors. Did I leave out anything?
> Anyway, the dmesg looks good and the server doesn't freeze or blow up.
>
> In the zaptel makefile, I uncommented the flag for SMP.
>
> My problem is that on my TDM20B, I lose dialtone after a while. One time I
> lost dialtone but had battery, another time lost both dt and battery. A
> reboot brings it back.
>
> Suggestions?
>
> TIA,
> Victor