[Asterisk-Users] Making a Skinny phone talk to Asterisk

[Eric Wieling]

If it doesn't find a host named ciscoccm1 then it will try to connect to
whatever host it got it's DHCP lease from. (assuming it's using DHCP, of
course)

On Sat, 2003-11-01 at 15:07, Brian West wrote:
> Last I checked skinny firmware would try to connect to a host that would
> resolve to CiscoCM1
> 
> bkw
> 
> On Sat, 1 Nov 2003, Ray Burkholder wrote:
> 
> > I have a few 7960 Skinny phones.  I've edited the skinny.conf file, but I'm
> > a little unsure as to how get the phone to figure out which ip address it
> > should register with when it boots.
> >
> > How do I do that?
> >
> > I already have a tftp server for my SIP based phones.  Do I need a tftp
> > server for skinny configs at all?  And if so, can it be the same tftp server
> > as the SIP ones use (I'm not sure about this as the OS79XX.TXT makes newly
> > arriving phones load the SIP image).
> >
> > Ray Burkholder
> > ray at oneunified.net
> > http://www.oneunified.net
> > 704 576 5101
> >
> >
> > --
> > Scanned for viruses and dangerous content at
> > http://www.oneunified.net and is believed to be clean.
> >
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Sample configs, scripts, more : http://www.fnords.org/~eric/asterisk/

BTEL Consulting 504-899-1387 or 850-484-4545 or 877-677-9643