[Asterisk-Users] Inbound PSTN Calls

[David J Carter]

Hi All,

Is it possible to show which line a call has come in on in *.

My scenario is 8 incoming lines, 6 lines are trunked to one number and the
other 2 are individual lines.

I would like to pass the trunked lines to one set of extensions, and the
other lines to two other set of extensions.

Also with the outgoing calls I would like to send the call out on the
correct line for the extension group.

I need to get this clear in my head before I go to a friend of mine who is
looking for a new switch and tell him that * can do the job.

The total system for a start will consist of, 8 PSTN (analogue lines and 25
extensions, with the possibility of expansion for remote SIP phones
globally).


Thanks in anticipation for any advice/recommendations.


Dave

PS. This may appear again as it was held for moderation as I had a picture
attached.