[Asterisk-Users] Newbie Big question

[Eric Wieling]

If you can find a channel bank that supports BRI in and T-1 or E-1 out
you can bring the BRI's into the channel bank from the TelCo and then
send them out the T-1 or E-1 interface on the channel bank into a T100P
or E100P on the Asterisk box.

On Mon, 2003-05-26 at 14:16, Brancaleoni Matteo wrote:
> Use a E1.
> Using 15 BRI means that you must use
> 4 x 4BRI cards (like AVM or Eicom active cards).
> There's no digium hardware till now for isdn BRI
> 
> a 4BRI card is about 1200$ more or less , so
> u must pay 4800$ only in cards
> A single E1 card is about 600$ ...
> 
> And E1 is well supported and only uses 1 pci slot...
> resulting in a much stable & reliable system.
> 
> Matteo.
> 
> Il lun, 2003-05-26 alle 20:34, chiardon at cable.net.co ha scritto:
> > Hello all
> > 
> > I need your support in a big decision in front of two alternatives
> > related with *. I must buy an E1, in order to manage 30 channels, given
> > this big price; or I could opt for a 15 BRIs without cost to replace the
> > same number of channels, and the question that inmediatly emerge is : ¿
> > can asterisk manage 15 BRIs ? If yes to the latter, could posible somo
> > guide, for instance, wich Digium hardware I must choose (Card and
> > channel bank) ? How can i configurate it??
> > 
> > Thanks a lot for your attention
> > Jorge Cardona 
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
BTEL Consulting
850-484-4535 x2111 (Office)
504-595-3916 x2111 (Experimental)
877-552-0838 (Backup Phone)