[Asterisk-Users] Answer not detected?

[Joe Antkowiak]

I do have callprogress=yes

Are there any variables I could change that might detect an answer better?  

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Martin Pycko
Sent: Wednesday, May 21, 2003 4:31 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Answer not detected?

Well do you use callprogress=yes in zapata.conf ?
If yes, then it's not working for you and you may turn it off for those
channels. With analog channels we either have to detect the call
proceeding states or we won't have it. Now if you turn callprogress off
you won't be able to use a timeout with Dial.

regards
Martin

On Wed, 21 May 2003, Joe Antkowiak wrote:

> I have this in extensions.conf:
>
> exten => 1,1,Dial,Zap/g9/4439568899/|24
> exten => 1,2,VoiceMail(u8004)
>
> and this happens:
>
>     -- Playing 'js-joe-trvm'
>     -- Executing Dial("Zap/2-1", "Zap/g9/4439568899/|24") in new stack
>     -- Called g9/4439568899/
>     -- Zap/1-1 is ringing
>     -- Zap/1-1 is ringing
>     -- Nobody picked up in 24000 ms
>     -- Hungup 'Zap/1-1'
>     -- Executing VoiceMail("Zap/2-1", "u8004") in new stack
>
> The problem is, the number dialed did pick up, and the call was connected,
> but it seems as if asterisk didn't detect that the call had been answered.
> Any ideas whats up?
>
> The channels are connected via the single port T1 card and an ADIT 600
> channel bank with an FXO-8 card.
>
> Any help would be much appreciated.
>
> -Joe
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users