[Asterisk-Users] E400P and 2 X100P working, but not together

[Jamie Carl]

*This message was transferred with a trial version of CommuniGate(tm) Pro*
Doesn't seem to work.

With a working config for an X100P, uncomment the following lines in
zaptel.conf:

span=1,1,0,esf,hdb3,crc4
dchan=2-33

That's the only changes I have made.  Now when I try to load wcfxo with
modprobe
I get an error which you said I may still get:

ZT_SPANCONFIG failed on span 1: Invalid argument (22)
/lib/modules/2.4.18-14/misc/wcfxo.o: post-install wcfxo failed
/lib/modules/2.4.18-14/misc/wcfxo.o: insmod wcfxo failed


But then, upon loading asterisk I get to following error:

  == Parsing '/etc/asterisk/zapata.conf': Found
WARNING[8192]: File chan_zap.c, Line 576 (zt_open): Unable to specify
channel 1:
 No such device or address
ERROR[8192]: File chan_zap.c, Line 4727 (mkintf): Unable to open channel
1: No s
uch device or address
here = 0, tmp->channel = 0, channel = 1
ERROR[8192]: File chan_zap.c, Line 6368 (load_module): Unable to
register channe
l '1'
WARNING[8192]: File loader.c, Line 299 (ast_load_resource): chan_zap.so:
load_mo
dule failed, returning -1
WARNING[8192]: File loader.c, Line 394 (load_modules): Loading module
chan_zap.s
o failed!

This tells me that the wcfxo module didn't actually pick up the card
correctly.
I didn't change anything else (yet) apart from the two lines above, and
I havn't
eveb tried to load the tor2 module.  So from what I can gather, having
lines in
zaptel.conf that the module doesn't understand seems to prevent it from
working.

Is this correct?  By design purhaps?  I'm lost as what to try next.

Regards,

Jamie Carl
Email:	me at jazz-inc.net
PH:		+61-414-365-466

-----Original Message-----
From: Steven Critchfield [mailto:critch at basesys.com]
Sent: Sunday, 18 May 2003 3:48 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] E400P and 2 X100P working, but not
together


*This message was transferred with a trial version of CommuniGate(tm)
Pro*
This all depends on the order you wish to have the channels appear.

I'd say if you don't have a fully deployed E400P, then put it last so as
to keep the ports all together when you deploy them later. 

So, make your X100P channel 1, and configure it like you had before.
Then your E400P channels start at channels 2-33. Since you are using 2
types of drivers, you may see an error after loading the first driver.
You may even want to run ztcfg after you load the second driver just to
be sure they all get configed right.  

On Sun, 2003-05-18 at 00:18, Jamie Carl wrote:
> Hey all,
>  
> I'm trying to get an E400P and 2 X100Ps working together in the one
> box and don't seem to be having much luck.
>  
> I can get the two different types of boards working separately, but
> not together.  I've made calls on both the X100P and have seen sync
> and correct signalling on the E400P.  But when I try to enable to
> configs together I get the following:
>  
> modprobe wcfxo produces:
> ZT_SPANCONFIG failed on span 1: Invalid argument (22)
> /lib/modules/2.4.18-14/misc/wcfxo.o: post-install wcfxo failed
> /lib/modules/2.4.18-14/misc/wcfxo.o: insmod wcfxo failed
>  
> and modprobe tor2 produces:
> ZT_SPANCONFIG failed on span 1: Invalid argument (22)
> /lib/modules/2.4.18-14/misc/tor2.o: post-install tor2 failed
> /lib/modules/2.4.18-14/misc/tor2.o: insmod tor2 failed
>  
> And nothing works.....
>  
> Now if I remove the E1 configs from zaptel.conf the wcfxo loads, and
> vice versa.  
>  
> Is there a way to get them working together????   Or will they be
> mutually exclusive, ie, an asterisk server can only have ether X100Ps
> OR E400Ps in it, but not both.
>  
> Has anyone else made them work together and is there something I'm
> missing?
> 
> Thanx all...
>  
> 
> Regards,
> 
> Jamie Carl
> 
> Email:
> 
> me at jazz-inc.net
> 
> Phone:
> 
> +61 414 365 466
> 
> Jabber:
> 
> jazz at netmindz.net
> 
> 
> 
-- 
Steven Critchfield <critch at basesys.com>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users