[Asterisk-Users] IAXTEL toll-free gateway

[Matt McIntyre]

After trying the configuration below to call 800 numbers unsuccessfully
I modified it to call a SIP extension and verified that it is setting
the CallerID information, and it is.

exten => _91800NXXXXXX,1,SetCallerID(248-724-0700)
exten => _91800NXXXXXX,2,SetCIDName()
exten =>
_91800NXXXXXX,3,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel)

So I still don't know what the problem is....

Sorry to be such a problem. I am sure this is something simple.

Matt

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Matt
McIntyre
Sent: Tuesday, May 06, 2003 11:15 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] IAXTEL toll-free gateway

I just tried that and it doesn't work for me. I don't where the bad luck
is coming from.

I get the same error:

-- Called blah:blahblah at iaxtel.com/18002255288 at iaxtel
    -- Call accepted by 216.207.245.47 (format 2)
    -- Format for call is 2
    -- IAX[demo]/2 is circuit-busy
  == Everyone is busy at this time
    -- Hungup 'IAX[demo]/2'

Ahh!


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Andrew
Gillham
Sent: Tuesday, May 06, 2003 10:41 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] IAXTEL toll-free gateway

On Tue, May 06, 2003 at 09:22:57AM -0400, John Lodden wrote:
> 
> Hello,
> 
>    The 1-800 Gateway is up, in fact it handles hundreds of calls
>    a day.  It is very important that the Caller ID, is set to a valid
10D
>    number or some tollfree long distance companies will not process
the
>    call. (ie AT&T)  If this continues to be a problem we can set the
>    Callerid to the inbound IAXTEL number of 248-724-0700. (Currently 
>    we allow IAXTEL to set the Callerid and pass it thru to our CLASS
4/5
>    switch which passes it thru to the LD carrier of the tollfree
number)

So should the following work for calling an 800 number?
exten => _91800NXXXXXX,1,SetCallerID(248-724-0700)
exten => _91800NXXXXXX,2,SetCIDName()
exten =>
_91800NXXXXXX,3,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel)

Where ${IAXINFO} is set to userid:password of my account.

Thanks.

-Andrew
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users