[Asterisk-Users] Error working with X101P and S400P cards (fwd)

[austino at skannet.com]

can somebody that has these  hardwares(X101P and S400P)  working on his
asterisk system please assist..................
you can send the solution to austino at skannet.com.....
the error message is what i have below.



---------- Forwarded message ----------
Date: Thu, 1 May 2003 21:01:21 +0100 (WAT)
From: austino at skannet.com
To: asterisk-user at lists.digium.com
Subject: Error working with X101P and S400P cards


hi,

i am trying to make 1 X101P and an S400P card workwith my asterisk but
each time irun astyerisk i get the following messages below.

chan_zap.so] => (Zapata Telephony)
  == Parsing '/etc/asterisk/zapata.conf': Found
WARNING[8192]: File chan_zap.c, Line 565 (zt_open): Unable to open
'/dev/zap/channel': No such device
ERROR[8192]: File chan_zap.c, Line 4503 (mkintf): Unable to open channel
1: No such device
here = 0, tmp->channel = 0, channel = 1
ERROR[8192]: File chan_zap.c, Line 6077 (load_module): Unable to register
channel '1'
WARNING[8192]: File loader.c, Line 273 (ast_load_resource): chan_zap.so:
load_module failed, returning -1
WARNING[8192]: File loader.c, Line 368 (load_modules): Loading module
chan_zap.so failed!

this is my /etc/zaptel.conf
 fxoks = 1  #X101P
 fxsks =2   #S400P

zapata.conf

signalling = fxs_ks
context =incoming
channel=1

signalling =fxo_ks
context= internal
channel2

extensions.conf
[incoming]
exten=>s,1,Dial,Zap/1|20

[outgoing]
exten => 125,1,Dial,Zap/2|20
[internal]
include=incoming
include=outgoing

i am running this on RH8.0. Someone Please assist.



-- 
Olaifa Augustine
General Data Engineering Services Ltd