[Asterisk-Users] Serious problem with z-plex 10
TC
trclark at shaw.ca
Mon Mar 31 20:26:57 MST 2003
If you can still login you can do
set2default
That will set it to factory defaults all your config info is now gone you
must re-provision
with all the slot nonsense
(the default user name is “admin,” the default password is “zhone”):
I have an old working config for a 24fxs zhone in format used by its tftp
loader
use at your own risk..
IF you't dont have a tftp server then grab one from here
http://www.jbmelectronics.com/tftp.htm
my old notes says...
after factory default config ..enter following cmds
#load new IP definition & enter ip/net mask
new ip-interface-record 1/1/1/0/ip
#save the ip config
update ip-interface-record 1/1/1/0/ip
#check it is correct
get ip-interface-record 1/1/1/0/ip
#connect to yout tftp server & load config from txt file
restore network <IP of your tftp server> zplexfxs.txt
I might have missed some thing that is obvious, :)
-----Original Message-----
From: Eris Riswanto <rizwanto at sdf.lonestar.org>
To: asterisk-users at lists.digium.com <asterisk-users at lists.digium.com>
Date: March 31, 2003 5:30 PM
Subject: Re: [Asterisk-Users] Serious problem with z-plex 10
>
>|Do not plug in ethernet cable at all, even if the interface is down.
>|
>|The long time to come up is due to the software being verified, and then
>|booted. It is that way on many channel banks.
>|
>|Also it could mean the zplex is not happy with the line coding it is
>|getting. It is a very sensitive device and flakes out if it doesn't get
>|good signal.
>|--
>|Steven Critchfield <critch at basesys.com>
>|
>
>The ethernet port from the device doesn't even connected to network.
>But i did configure the ethernet interface. I think the device
>mess up with the network configuration.
>How can i get back the device to original configuration?
>Anybody experienced with it, or any good idea to fix this problem?
>
>Thanks in advance
>
>Eris Riswanto
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
create if-translate 1/1/1/0/18
set ifindex = 1
set shelf = 1
set slot = 1
set port = 1
set subport = 0
set type = ds1
set adminstatus = up
commit if-translate 1/1/1/0/18
create if-translate 1/1/2/0/18
set ifindex = 2
set shelf = 1
set slot = 1
set port = 2
set subport = 0
set type = ds1
set adminstatus = down
commit if-translate 1/1/2/0/18
create if-translate 1/1/1/0/102
set ifindex = 3
set shelf = 1
set slot = 1
set port = 1
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/1/0/102
create if-translate 1/1/2/0/102
set ifindex = 4
set shelf = 1
set slot = 1
set port = 2
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/2/0/102
create if-translate 1/1/3/0/102
set ifindex = 5
set shelf = 1
set slot = 1
set port = 3
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/3/0/102
create if-translate 1/1/4/0/102
set ifindex = 6
set shelf = 1
set slot = 1
set port = 4
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/4/0/102
create if-translate 1/1/5/0/102
set ifindex = 7
set shelf = 1
set slot = 1
set port = 5
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/5/0/102
create if-translate 1/1/6/0/102
set ifindex = 8
set shelf = 1
set slot = 1
set port = 6
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/6/0/102
create if-translate 1/1/7/0/102
set ifindex = 9
set shelf = 1
set slot = 1
set port = 7
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/7/0/102
create if-translate 1/1/8/0/102
set ifindex = 10
set shelf = 1
set slot = 1
set port = 8
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/8/0/102
create if-translate 1/1/9/0/102
set ifindex = 11
set shelf = 1
set slot = 1
set port = 9
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/9/0/102
create if-translate 1/1/10/0/102
set ifindex = 12
set shelf = 1
set slot = 1
set port = 10
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/10/0/102
create if-translate 1/1/11/0/102
set ifindex = 13
set shelf = 1
set slot = 1
set port = 11
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/11/0/102
create if-translate 1/1/12/0/102
set ifindex = 14
set shelf = 1
set slot = 1
set port = 12
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/12/0/102
create if-translate 1/1/13/0/102
set ifindex = 15
set shelf = 1
set slot = 1
set port = 13
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/13/0/102
create if-translate 1/1/14/0/102
set ifindex = 16
set shelf = 1
set slot = 1
set port = 14
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/14/0/102
create if-translate 1/1/15/0/102
set ifindex = 17
set shelf = 1
set slot = 1
set port = 15
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/15/0/102
create if-translate 1/1/16/0/102
set ifindex = 18
set shelf = 1
set slot = 1
set port = 16
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/16/0/102
create if-translate 1/1/17/0/102
set ifindex = 19
set shelf = 1
set slot = 1
set port = 17
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/17/0/102
create if-translate 1/1/18/0/102
set ifindex = 20
set shelf = 1
set slot = 1
set port = 18
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/18/0/102
create if-translate 1/1/19/0/102
set ifindex = 21
set shelf = 1
set slot = 1
set port = 19
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/19/0/102
create if-translate 1/1/20/0/102
set ifindex = 22
set shelf = 1
set slot = 1
set port = 20
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/20/0/102
create if-translate 1/1/21/0/102
set ifindex = 23
set shelf = 1
set slot = 1
set port = 21
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/21/0/102
create if-translate 1/1/22/0/102
set ifindex = 24
set shelf = 1
set slot = 1
set port = 22
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/22/0/102
create if-translate 1/1/23/0/102
set ifindex = 25
set shelf = 1
set slot = 1
set port = 23
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/23/0/102
create if-translate 1/1/24/0/102
set ifindex = 26
set shelf = 1
set slot = 1
set port = 24
set subport = 0
set type = voicefxs
set adminstatus = up
commit if-translate 1/1/24/0/102
create if-translate 1/1/1/0/6
set ifindex = 27
set shelf = 1
set slot = 1
set port = 1
set subport = 0
set type = ethernetcsmacd
set adminstatus = up
commit if-translate 1/1/1/0/6
create if-translate 1/1/1/0/126
set ifindex = 28
set shelf = 1
set slot = 1
set port = 1
set subport = 0
set type = ip
set adminstatus = up
commit if-translate 1/1/1/0/126
create analog-fxs-cfg-profile 1/1/1/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/1/0/102
create analog-fxs-cfg-profile 1/1/2/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/2/0/102
create analog-fxs-cfg-profile 1/1/3/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/3/0/102
create analog-fxs-cfg-profile 1/1/4/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/4/0/102
create analog-fxs-cfg-profile 1/1/5/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/5/0/102
create analog-fxs-cfg-profile 1/1/6/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/6/0/102
create analog-fxs-cfg-profile 1/1/7/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/7/0/102
create analog-fxs-cfg-profile 1/1/8/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/8/0/102
create analog-fxs-cfg-profile 1/1/9/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/9/0/102
create analog-fxs-cfg-profile 1/1/10/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/10/0/102
create analog-fxs-cfg-profile 1/1/11/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/11/0/102
create analog-fxs-cfg-profile 1/1/12/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/12/0/102
create analog-fxs-cfg-profile 1/1/13/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/13/0/102
create analog-fxs-cfg-profile 1/1/14/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/14/0/102
create analog-fxs-cfg-profile 1/1/15/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/15/0/102
create analog-fxs-cfg-profile 1/1/16/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/16/0/102
create analog-fxs-cfg-profile 1/1/17/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/17/0/102
create analog-fxs-cfg-profile 1/1/18/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/18/0/102
create analog-fxs-cfg-profile 1/1/19/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/19/0/102
create analog-fxs-cfg-profile 1/1/20/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/20/0/102
create analog-fxs-cfg-profile 1/1/21/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/21/0/102
create analog-fxs-cfg-profile 1/1/22/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/22/0/102
create analog-fxs-cfg-profile 1/1/23/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/23/0/102
create analog-fxs-cfg-profile 1/1/24/0/102
set signal-type = fxsloopstart
set ring-frequency = ringfrequency20
set ring-back = off
commit analog-fxs-cfg-profile 1/1/24/0/102
create analog-if-cfg-profile 1/1/1/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/1/0/102
create analog-if-cfg-profile 1/1/2/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/2/0/102
create analog-if-cfg-profile 1/1/3/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/3/0/102
create analog-if-cfg-profile 1/1/4/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/4/0/102
create analog-if-cfg-profile 1/1/5/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/5/0/102
create analog-if-cfg-profile 1/1/6/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/6/0/102
create analog-if-cfg-profile 1/1/7/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/7/0/102
create analog-if-cfg-profile 1/1/8/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/8/0/102
create analog-if-cfg-profile 1/1/9/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/9/0/102
create analog-if-cfg-profile 1/1/10/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/10/0/102
create analog-if-cfg-profile 1/1/11/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/11/0/102
create analog-if-cfg-profile 1/1/12/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/12/0/102
create analog-if-cfg-profile 1/1/13/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/13/0/102
create analog-if-cfg-profile 1/1/14/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/14/0/102
create analog-if-cfg-profile 1/1/15/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/15/0/102
create analog-if-cfg-profile 1/1/16/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/16/0/102
create analog-if-cfg-profile 1/1/17/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/17/0/102
create analog-if-cfg-profile 1/1/18/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/18/0/102
create analog-if-cfg-profile 1/1/19/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/19/0/102
create analog-if-cfg-profile 1/1/20/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/20/0/102
create analog-if-cfg-profile 1/1/21/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/21/0/102
create analog-if-cfg-profile 1/1/22/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/22/0/102
create analog-if-cfg-profile 1/1/23/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/23/0/102
create analog-if-cfg-profile 1/1/24/0/102
set if-cfg-impedence = ohms600real
set if-cfg-receive-tlp = fxsrtlp0db
set if-cfg-transmit-tlp = fxsttlp0db
set if-cfg-trunk-conditioning = idle
set if-maintenance-mode = off
set if-cfg-pcm-encoding = mulaw
commit analog-if-cfg-profile 1/1/24/0/102
create ds1 1/1/1/0/18
set line-type = esf
set line-code = b8zs
set send-code = sendnocode
set circuit-id = ds1
set loopback-config = noloop
set signal-mode = none
set transmit-clock-source = looptiming
set fdl = fdlnone
set dsx-line-length = dsx0
set line-status-change-trap-enable = disabled
set channelization = disabled
set ds1-mode = csu
set csu-line-length = csu00
set clock-source-eligible = eligible
commit ds1 1/1/1/0/18
create ds1 1/1/2/0/18
set line-type = esf
set line-code = b8zs
set send-code = sendnocode
set circuit-id = ds1
set loopback-config = noloop
set signal-mode = none
set transmit-clock-source = looptiming
set fdl = fdlnone
set dsx-line-length = dsx0
set line-status-change-trap-enable = disabled
set channelization = disabled
set ds1-mode = csu
set csu-line-length = csu00
set clock-source-eligible = noteligible
commit ds1 1/1/2/0/18
create ether 27
set autonegstatus = enabled
set mauType = mau100basetxfd
set restart = norestart
set ifType = mau100basetxfd
set autonegcap = b100baseTFD
set remotefault = noerror
commit ether 27
create if-default 0/126/6
set cardtype = 0
set upperiftype = ip
set loweriftype = ethernetcsmacd
set numunits = 1
set adminStatus = up
commit if-default 0/126/6
create if-default 0/6/0
set cardtype = 0
set upperiftype = ethernetcsmacd
set loweriftype = NONE(0)
set numunits = 1
set adminStatus = up
commit if-default 0/6/0
create if-default 0/126/159
set cardtype = 0
set upperiftype = ip
set loweriftype = rfc1483
set numunits = 1
set adminStatus = up
commit if-default 0/126/159
create if-default 0/159/49
set cardtype = 0
set upperiftype = rfc1483
set loweriftype = aal5
set numunits = 1
set adminStatus = up
commit if-default 0/159/49
create if-default 0/49/168
set cardtype = 0
set upperiftype = aal5
set loweriftype = hdsl2
set numunits = 1
set adminStatus = up
commit if-default 0/49/168
create if-default 0/168/0
set cardtype = 0
set upperiftype = hdsl2
set loweriftype = NONE(0)
set numunits = 1
set adminStatus = up
commit if-default 0/168/0
create if-default 0/37/0
set cardtype = 0
set upperiftype = atm
set loweriftype = NONE(0)
set numunits = 1
set adminStatus = up
commit if-default 0/37/0
create if-next-index 1/1/1/0/18
set nextifindex = 34
commit if-next-index 1/1/1/0/18
create if-stack 28/27
set upperlayer = 28
set lowerlayer = 27
commit if-stack 28/27
create ip-interface-record 1/1/1/0/126
set lgid = 0
set vpi = 0
set vci = 0
set rdindex = 0
set dhcp = none
set addr = 192.168.1.250
set netmask = 255.255.255.0
set bcastaddr = 0.0.0.0
set destaddr = 0.0.0.0
set farendaddr = 0.0.0.0
set mru = 0
set reasmmaxsize = 0
set ingressfiltername = ""
set egressfiltername = ""
set pointtopoint = no
set mcastenabled = yes
set ipfwdenabled = yes
set mcastfwdenabled = yes
set natenabled = no
set bcastenabled = yes
commit ip-interface-record 1/1/1/0/126
create line-group 1
set group-id = 1
set group-name = ""
set primary-name = 1
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 1
create line-group 2
set group-id = 2
set group-name = ""
set primary-name = 2
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = down
commit line-group 2
create line-group 3
set group-id = 3
set group-name = ""
set primary-name = 3
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 3
create line-group 4
set group-id = 4
set group-name = ""
set primary-name = 4
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 4
create line-group 5
set group-id = 5
set group-name = ""
set primary-name = 5
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 5
create line-group 6
set group-id = 6
set group-name = ""
set primary-name = 6
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 6
create line-group 7
set group-id = 7
set group-name = ""
set primary-name = 7
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 7
create line-group 8
set group-id = 8
set group-name = ""
set primary-name = 8
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 8
create line-group 9
set group-id = 9
set group-name = ""
set primary-name = 9
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 9
create line-group 10
set group-id = 10
set group-name = ""
set primary-name = 10
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 10
create line-group 11
set group-id = 11
set group-name = ""
set primary-name = 11
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 11
create line-group 12
set group-id = 12
set group-name = ""
set primary-name = 12
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 12
create line-group 13
set group-id = 13
set group-name = ""
set primary-name = 13
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 13
create line-group 14
set group-id = 14
set group-name = ""
set primary-name = 14
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 14
create line-group 15
set group-id = 15
set group-name = ""
set primary-name = 15
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 15
create line-group 16
set group-id = 16
set group-name = ""
set primary-name = 16
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 16
create line-group 17
set group-id = 17
set group-name = ""
set primary-name = 17
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 17
create line-group 18
set group-id = 18
set group-name = ""
set primary-name = 18
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 18
create line-group 19
set group-id = 19
set group-name = ""
set primary-name = 19
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 19
create line-group 20
set group-id = 20
set group-name = ""
set primary-name = 20
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 20
create line-group 21
set group-id = 21
set group-name = ""
set primary-name = 21
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 21
create line-group 22
set group-id = 22
set group-name = ""
set primary-name = 22
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 22
create line-group 23
set group-id = 23
set group-name = ""
set primary-name = 23
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 23
create line-group 24
set group-id = 24
set group-name = ""
set primary-name = 24
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 24
create line-group 25
set group-id = 25
set group-name = ""
set primary-name = 25
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 25
create line-group 26
set group-id = 26
set group-name = ""
set primary-name = 26
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 26
create line-group 27
set group-id = 27
set group-name = ""
set primary-name = 27
set primary-weight = 0
set secondary-name = 0
set secondary-weight = 0
set admin-state = up
commit line-group 27
create line-profile 1/1/1/0/18
set profile-name = "Ds1 default line profile"
set shelf = 1
set slot = 1
set port = 1
set subPort = 0
set line-group-name = 1
commit line-profile 1/1/1/0/18
create line-profile 1/1/2/0/18
set profile-name = "Ds1 default line profile"
set shelf = 1
set slot = 1
set port = 2
set subPort = 0
set line-group-name = 2
commit line-profile 1/1/2/0/18
create line-profile 1/1/1/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 1
set subPort = 0
set line-group-name = 3
commit line-profile 1/1/1/0/102
create line-profile 1/1/2/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 2
set subPort = 0
set line-group-name = 4
commit line-profile 1/1/2/0/102
create line-profile 1/1/3/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 3
set subPort = 0
set line-group-name = 5
commit line-profile 1/1/3/0/102
create line-profile 1/1/4/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 4
set subPort = 0
set line-group-name = 6
commit line-profile 1/1/4/0/102
create line-profile 1/1/5/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 5
set subPort = 0
set line-group-name = 7
commit line-profile 1/1/5/0/102
create line-profile 1/1/6/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 6
set subPort = 0
set line-group-name = 8
commit line-profile 1/1/6/0/102
create line-profile 1/1/7/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 7
set subPort = 0
set line-group-name = 9
commit line-profile 1/1/7/0/102
create line-profile 1/1/8/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 8
set subPort = 0
set line-group-name = 10
commit line-profile 1/1/8/0/102
create line-profile 1/1/9/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 9
set subPort = 0
set line-group-name = 11
commit line-profile 1/1/9/0/102
create line-profile 1/1/10/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 10
set subPort = 0
set line-group-name = 12
commit line-profile 1/1/10/0/102
create line-profile 1/1/11/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 11
set subPort = 0
set line-group-name = 13
commit line-profile 1/1/11/0/102
create line-profile 1/1/12/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 12
set subPort = 0
set line-group-name = 14
commit line-profile 1/1/12/0/102
create line-profile 1/1/13/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 13
set subPort = 0
set line-group-name = 15
commit line-profile 1/1/13/0/102
create line-profile 1/1/14/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 14
set subPort = 0
set line-group-name = 16
commit line-profile 1/1/14/0/102
create line-profile 1/1/15/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 15
set subPort = 0
set line-group-name = 17
commit line-profile 1/1/15/0/102
create line-profile 1/1/16/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 16
set subPort = 0
set line-group-name = 18
commit line-profile 1/1/16/0/102
create line-profile 1/1/17/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 17
set subPort = 0
set line-group-name = 19
commit line-profile 1/1/17/0/102
create line-profile 1/1/18/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 18
set subPort = 0
set line-group-name = 20
commit line-profile 1/1/18/0/102
create line-profile 1/1/19/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 19
set subPort = 0
set line-group-name = 21
commit line-profile 1/1/19/0/102
create line-profile 1/1/20/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 20
set subPort = 0
set line-group-name = 22
commit line-profile 1/1/20/0/102
create line-profile 1/1/21/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 21
set subPort = 0
set line-group-name = 23
commit line-profile 1/1/21/0/102
create line-profile 1/1/22/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 22
set subPort = 0
set line-group-name = 24
commit line-profile 1/1/22/0/102
create line-profile 1/1/23/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 23
set subPort = 0
set line-group-name = 25
commit line-profile 1/1/23/0/102
create line-profile 1/1/24/0/102
set profile-name = "default line profile "
set shelf = 1
set slot = 1
set port = 24
set subPort = 0
set line-group-name = 26
commit line-profile 1/1/24/0/102
create line-profile 1/1/1/0/6
set profile-name = "default line profile"
set shelf = 1
set slot = 1
set port = 1
set subPort = 0
set line-group-name = 27
commit line-profile 1/1/1/0/6
create physical-to-ifindex 1/1/1/0
set ifindex = 27
commit physical-to-ifindex 1/1/1/0
create rip-if-config 0/192/168/1/250
set auth-type = none
set auth-key = ""
set send-type = donotsend
set receive-type = donotreceive
set default-metric = 0
set src-address = -1062731270
set sroute-advertise = none
set poison = disabled
commit rip-if-config 0/192/168/1/250
create system 0
set syscontact = ""
set sysname = ""
set syslocation = ""
set enableauthtraps = NONE(0)
set setserialno = 0
set zmsexists = false
set zmsconnectionstatus = inactive
set zmsipaddress = 0.0.0.0
set configsyncexists = NONE(0)
set configsyncoverflow = NONE(0)
set configsyncpriority = low
set configsyncaction = NONE(0)
set configsyncfilename = ""
set configsyncstatus = NONE(0)
set configsyncuser = ""
set configsyncpasswd = ""
set numshelves = 0
set shelvesarray = ""
set numcards = 0
set ipaddress = 0.0.0.0
set alternateipaddress = 0.0.0.0
commit system 0
create tdm-xcon 1/1
set xcon-type = voice
set xcon-to-port-group-id = 3
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/1
create tdm-xcon 1/2
set xcon-type = voice
set xcon-to-port-group-id = 4
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/2
create tdm-xcon 1/3
set xcon-type = voice
set xcon-to-port-group-id = 5
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/3
create tdm-xcon 1/4
set xcon-type = voice
set xcon-to-port-group-id = 6
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/4
create tdm-xcon 1/5
set xcon-type = voice
set xcon-to-port-group-id = 7
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/5
create tdm-xcon 1/6
set xcon-type = voice
set xcon-to-port-group-id = 8
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/6
create tdm-xcon 1/7
set xcon-type = voice
set xcon-to-port-group-id = 9
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/7
create tdm-xcon 1/8
set xcon-type = voice
set xcon-to-port-group-id = 10
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/8
create tdm-xcon 1/9
set xcon-type = voice
set xcon-to-port-group-id = 11
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/9
create tdm-xcon 1/10
set xcon-type = voice
set xcon-to-port-group-id = 12
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/10
create tdm-xcon 1/11
set xcon-type = voice
set xcon-to-port-group-id = 13
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/11
create tdm-xcon 1/12
set xcon-type = voice
set xcon-to-port-group-id = 14
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/12
create tdm-xcon 1/13
set xcon-type = voice
set xcon-to-port-group-id = 15
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/13
create tdm-xcon 1/14
set xcon-type = voice
set xcon-to-port-group-id = 16
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/14
create tdm-xcon 1/15
set xcon-type = voice
set xcon-to-port-group-id = 17
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/15
create tdm-xcon 1/16
set xcon-type = voice
set xcon-to-port-group-id = 18
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/16
create tdm-xcon 1/17
set xcon-type = voice
set xcon-to-port-group-id = 19
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/17
create tdm-xcon 1/18
set xcon-type = voice
set xcon-to-port-group-id = 20
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/18
create tdm-xcon 1/19
set xcon-type = voice
set xcon-to-port-group-id = 21
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/19
create tdm-xcon 1/20
set xcon-type = voice
set xcon-to-port-group-id = 22
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/20
create tdm-xcon 1/21
set xcon-type = voice
set xcon-to-port-group-id = 23
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/21
create tdm-xcon 1/22
set xcon-type = voice
set xcon-to-port-group-id = 24
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/22
create tdm-xcon 1/23
set xcon-type = voice
set xcon-to-port-group-id = 25
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/23
create tdm-xcon 1/24
set xcon-type = voice
set xcon-to-port-group-id = 26
set xcon-to-TS = 0
set xcon-highway = na
commit tdm-xcon 1/24
create user-profile 0
set user-id = 0
set user-name = USER_SEED_REC
set user-pass = NOT_A_USER
set user-prompt = 10
set admin-access = 0
set debug-access = 0
set voice-access = 0
set data-access = 0
set manuf-access = 0
set database-access = 0
set system-access = 0
set tools-access = 0
set user-admin-access = 0
set zhone-access = 0
commit user-profile 0
create user-profile 1
set user-id = 1
set user-name = zhonedevel
set user-pass = zeebbSdSd
set user-prompt = zSH>
set admin-access = 1
set debug-access = 1
set voice-access = 1
set data-access = 1
set manuf-access = 1
set database-access = 1
set system-access = 1
set tools-access = 1
set user-admin-access = 1
set zhone-access = 1
commit user-profile 1
create user-profile 2
set user-id = 2
set user-name = admin
set user-pass = Sedyzybceb
set user-prompt = zSH>
set admin-access = 1
set debug-access = 0
set voice-access = 1
set data-access = 1
set manuf-access = 1
set database-access = 1
set system-access = 1
set tools-access = 1
set user-admin-access = 1
set zhone-access = 0
commit user-profile 2
More information about the asterisk-users
mailing list