[Asterisk-Users] Integrating Asterisk with an existing PBX

[Andres Tello Abrego]

I have done exactly taht usingdigium x100p cards... :)

Very nice indeed...


On Sun, 30 Mar 2003, Richard Scobie wrote:

> I am hoping to implement an asterisk system between two offices as below
>
> |-------|
> | PBX   |-----(XXX)--[asterisk]---[VPN]----[asterisk]--(FXO)--phone
> |-------|                                         |
>                                                    |-(FXS)--PSTN
>
> I am unsure which interface I need to connect the existing analog
> (Panasonic) PBX to asterisk, assuming  I will be connecting on the
> office side of the PBX (making the asterisk an extension on the PBX).
>
> I am assuming it will be an FXO and envisage using Zaptel interfaces.
> Replacing the PBX with asterisk is not an option at this stage.
>
> As I am in New Zealand, which uses different ring tones/cadences to the
> US, are there any issues there?
>
> Any comments, caveats on this setup gratefully received.
>
> Regards,
>
> Richard Scobie
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>