[Asterisk-Users] very strange hangup.

[diana]

> I'm afraid you have to do "debug channel" also on IAX[England at England]/3
> (since that info doesn't tell me much)
> The same on the other box.

The debug channel was activated on IAX channel.

> regards
> Martin

Diana Cionoiu

> On Fri, 28 Mar 2003, diana wrote:
>
> > << [ TYPE: Null Frame (4) SUBCLASS: N/A (5) ] [Zap/1-1]
> >     -- Hungup 'Zap/1-1'
> >   == Spawn extension (flux1, 11011, 1) exited non-zero on
> > 'IAX[England at England]/3'
> >     -- Hungup 'IAX[England at England]/3'
> >
> > I get this error message in 2 Asterisk, when the channel is closed.
> > Any idee about this?
> >
> > Diana Cionoiu
> >
> >
> > > You can use "debug channel <channel>" on asterisk console
> > > to find out which channel sends disconnect/hangup ....
> > > You have to trace all the channels on both of your systems.
> > >
> > > regards
> > > Martin
> > >
> > > On Thu, 27 Mar 2003, diana wrote:
> > >
> > > > Hello,
> > > >
> > > > I have a very complicated system which contains 2 *'s.
> > > >
> > > > PSTN --- CISCO --- H.323 --- 1 Asterisk --- IAX --- 2 Asterisk --- PSTN
> > > >
> > > > In the middle of conversation i get a Hangup. I get this logs when it
> > > > disconnect on the 2 Asterisk.
> > > > I must metion that the call is originated by Cisco, and i can't make any
> > > > calls to the Cisco.
> > > >
> > > > Rx-Frame Retry[N/A] -- Seqno: 12  Type: IAX     Subclass: ACK
> > > > > Protocol Discriminator: Q.931 (8)  len=9
> > > > > Call Ref: len= 2 (reference 6/0x6) (Originator)
> > > > > Message type: DISCONNECT (69)
> > > > > Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0
> > > > Location: Private network serving the local user (1)
> > > > >                  Ext: 1  Cause: Normal Clearing (16), class = Normal
> > > > Event (1) ]
> > > >     -- Hungup 'Zap/3-1'
> > > >   == Spawn extension (flux1, 11011, 1) exited non-zero on
> > > > 'IAX[England at England]/2'
> > > > Tx-Frame Retry[000] -- Seqno: 13  Type: IAX     Subclass: HANGUP
> > > >     -- Hungup 'IAX[England at England]/2'
> > > > Rx-Frame Retry[N/A] -- Seqno: 13  Type: IAX     Subclass: ACK
> > > > < Protocol Discriminator: Q.931 (8)  len=5
> > > > < Call Ref: len= 2 (reference 32774/0x8006) (Terminator)
> > > > < Message type: RELEASE (77)
> > > > > Protocol Discriminator: Q.931 (8)  len=5
> > > > > Call Ref: len= 2 (reference 6/0x6) (Originator)
> > > > > Message type: RELEASE COMPLETE (90)
> > > >
> > > >
> > > > I really don't know what is going on, and i will apreciate any idee.
> > > >
> > > > Thank you very much.
> > > >
> > > > Diana Cionoiu
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>