[Asterisk-Users] X100P incoming call handling

[Mark Spencer]

It *shouldn't* be necessary to answer the line before executing dial.  At
the point the SIP phone answers, it should *then* answer the X100P.
As usual, find me on IRC and I can spend some time debugging it.  See
http://www.digium.com for IRC info.

Mark

On Sun, 23 Mar 2003, Steven Critchfield wrote:

> quick quess is you are not answering the line.
>
> exten => s,1,Answer
> exten => s,2,Dial,SIP/snomphone
>
> On Sun, 2003-03-23 at 17:05, Tamas Levente wrote:
> > Hi,
> > I have some problem with a x100p hadling incoming calls. It goes to
> > the "incoming" context, which looks like:
> > exten => s,1,Dial,SIP/snomphone
> > I have [snomphone] in sip.conf.
> > So when call comes in, it rings on the snomphone, but I can't answer
> > the call. I get the voip phone and after a few noises it says
> > released. But the line keep ringing in Zap.
> > Please help
> > __________________________________________________________________
> > Levente Tamás
> > ICQ#: 13692773
> > Current ICQ status:
> > [image]
> > +  More ways to contact me
> > __________________________________________________________________
> --
> Steven Critchfield <critch at basesys.com>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>